The Epicenter restores the earth-shaking power and heart-pounding bass your subwoofers crave. Give your subwoofers the juice to go lower and hit harder. The Epicenter uses a bass circuit to drive your subwoofers lower, grabbing the attention of every eye on the boulevard.
How do you adjust the audio control epicenter?
Adjust the Para Bass controls by turning the sweep control clockwise to raise the center frequency. If you still have distortion, you should power down The Epicenter, remove the cover and change the Bass Output setting to a lower position (i.e. 2.5 volts).
Is a bass epicenter worth it?
In reality it’s a somewhat smarter bass boost. An Epicenter in the wrong hands would wreck a system pretty quick. It’s worth noting that Audio Control themselves suggest you put the Epicenter in before you mid or midbasses as well as your subs to allow the “bass restoration” to enhance those signals as well.
What should the sweep be set at on a epicenter?
The effective range of the sweep control is 27Hz – 63Hz. The factory setting is detented at 40Hz. Our suggestion is to start out at around ¾ to full clockwise rotation.
Are AccuBASS necessary?
You need to figure out if your car has its bass rolled off or if it’s a clean flat signal. If it’s flat, you don’t need Accubass. If it’s rolled off, Accubass can be helpful. If you plan on getting a DSP in the future, just get the DSP.
What does a bass enhancer do?
A Bass Enhancer raises the lower end of an audio signal without simply raising the lower frequencies like an equalizer would do to create a more “fat” or “boomy” sound.
What does a soundstream digital bass machine do?
The processor detects bass harmonics, then digitally recreates the original essentials for the incredible punch and impact of live music. Basically, you get more bass! Works great for music or factory radios that forgot we enjoy bass response in our systems!
What does a digital bass machine do?
Although adding a subwoofer to your car audio system will definitely allow you to hear more of those low frequencies, a bass restoration processor digitally restores that heart-pounding bass that is still missing from your music.
What is a subsonic filter?
SUBSONIC FILTER – is basically a HPF (high pass frequency) filter for your subwoofers. As we discussed earlier in this article, subwoofer amps typically use LPF (low pass frequency) filters to block high frequencies that should be playing through your speakers.
What does maximized mean on LC2i?
The Maximized light on the LC2i is a warning for when distorted signal is sent to the outputs of the device. Keep in mind, it will not light up when receiving audio signal, only when it detects distortion on outputs from the device.
