snmpwalk -v1 -c public $ip enterprises.10642.20.10.10.5.11.3.0;
snmpget -v1 -c public $ip enterprises.10642.20.10.10.5.11.4.0;
snmpset -v1 -c public $ip enterprises.10642.20.10.10.5.11.4.0 s 1664 ;
the snmpset was working with me fine before changed the community name from "public" to "loreal" after the change the snmpget is respond but the snmpset not respond >>>
C:\>snmpGet -v1 -c loreal $ip 1.3.6.1.4.1.10642.20.10.10.5.11.4.0
SNMPv2-SMI::enterprises.10642.20.10.10.5.11.4.0 = STRING: "********"
C:\>snmpSet -v1 -c loreal $ip 1.3.6.1.4.1.10642.20.10.10.5.11.4.0 s 1664
Timeout: No Response from 10.84.10.85
SO anybody have an idea!!
1 Answer
You can change CommunityName in ZEPRA printer by sending the commands ZPLII.
for more information: ZPL II Programming Guide
Description ^NN command: Use this command to set the Simple Network Management Protocol (SNMP) parameters. Format ^NNa,b,c,d,e,f
EX:
^XA
^NN,,,test,test,test
^XZ
We can change it with SGD commands
! U1 setvar "ip.snmp.get_community_name" "TEST"
! U1 setvar "ip.snmp.set_community_name" "TEST"
