I need to upgrade my existing wireless infrastructure and this time I want 2 access points to cover my house, since I get blind spots no matter what with a single AP. I have physical cabling to my central network available for both access points.
I would really like these two to interoperate seamlessly as a single SSID. How do I do this? What are the features that the new access points I'm buying would need to support?
5 Answers
Multi-AP Roaming Network Background
There is no magic to making multiple-AP (roaming) 802.11 networks work. Wireless clients just assume that all APs with the same SSID are configured similarly and are all just different points of access to the same underlying wired network. A client will scan all channels looking for APs publishing the SSID it wants, and will pick whichever one suits its needs best (usually that means whichever one shows the highest signal strength).
Once on the network, clients stay with the same AP as long as it is meeting the client's needs (i.e. as long as its signal strength is above a "good enough" threshold). If the client later thinks it could be better off with another AP on that network, it will do periodic scans of all channels looking for other APs publishing that SSID. If a scan turns up a candidate AP that is enough better than the AP it is currently on, it will automatically roam to the other AP, usually without so much as a missed frame.
One roaming caveat: As another commenter pointed out, there are definitely poorly engineered clients out there with poor roaming algorithms or thresholds, which don't actually roam when they should, and thus end up being too "sticky", staying on the first AP they joined well after they could have been getting better performance and reliability with another AP that they are now closer to. Sometimes it helps to force the client's Wi-Fi interface to rejoin the network when you notice that a client has stuck to the wrong AP. If you have a lot of these buggy clients, then using the same SSID for multiple APs might not work well for you; you might want to use different SSIDs so you can more easily monitor and control which AP your client is associated to.*
Assuming both APs are configured similarly and are connected to the same underlying network, roaming is seamless and invisible to the user (except nerds like me who run tools to watch for these things). Roaming events are invisible to applications using the network, although some low-level parts of the network stack might be notified of the event, so that, for example, your DHCP client can double-check that this new AP really is connected to the same network, so it can be sure your DHCP lease is still valid on this network.
Some other users' Answers and Comments on this question erroneously suggested that wireless protocols or features like wireless relay or WDS might be needed for roaming, but that is absolutely incorrect. Those features are just ways to replace a wired Ethernet backhaul with a wireless one.
For the sake of completeness, I should mention that there is a set of technologies, some proprietary, some standardized in IEEE 802.11F, known generally as Inter-Access Point Protocol. IAPP is a method by which generally enterprise-class APs can communicate with each other over the backhaul to optimize client roaming. But that's just an optimization, not a prerequisite for roaming. Roaming works "well enough" on networks both small and large without any IAPP going on.
