ProAc’s high-end K series has been in production for 12 years now. The speakers in the range have evolved and been improved in that time, of course, but they have always been floorstanders. Until now that is.

ProAc says there was a growing demand for a flagship standmount option and it was happy to oblige. The company isn’t known for rushing the development of new products, so it comes as no surprise that it has taken years for the K1 to make their way into production.

Build

On first viewing, these speakers have a slightly odd appearance, courtesy of an unusual plinth arrangement that echoes the design of the various K series towers. While it works well visually on the floorstanders, such a look takes a little acclimatisation when transferred to a much shorter standmounter.

This arrangement allows for a downward-facing port and gives a known fixed boundary (the plinth) for the port to fire on. Without that boundary, the speaker designer is left to guess at the available space between the port and any surface it fires onto, which naturally leads to less precise port tuning. A downward-firing port should also make the speakers a little less fussy about room placement than a typical rear-firing alternative would be.

The K1’s overall build quality is as good as the price demands. The cabinet is neatly made in general, with nice crisp edges and a lovely real wood finish. ProAc has gone for High Density Fibreboard (HDF) panels all round, but with different thicknesses to spread resonances. These panels are carefully damped with bitumen to control those resonances and the result should be a quiet, but rigid, cabinet.

There are six standard finishes options: black ash, mahogany, cherry, natural oak, silk white and walnut. But if those don’t suit you can choose to have rosewood, ebony, tamo ash or dark eucalyptus for a premium of £900 ($1000, AU$1400). There’s no doubt these are solidly made speakers that have been assembled with great care, but there are a couple of cosmetic niggles.

While no one will see the plinth’s bottom surface once the speakers are on stands, it’s a shame that ProAc didn’t cover the base with veneer or give it some other treatment to make it look smarter. Currently, it looks a little unfinished with the plain wooden panel visible. This feels like cost-cutting that has no place in a product such as this. The way the plinth’s metal front plate is attached looks a little messy from underneath, too. Neither of these things are major issues, but at this price level, such small details matter.

ProAc makes 50cm-tall dedicated stands for the K1 that cost £995 ($1995). They require assembling and are held together by an oddly varied collection of screws and bolts. There are four columns in total for each stand and, thanks to pretty clear instructions, it doesn’t take long to put them together. The silver one in the front is solid aluminium (matching a similar piece on the front of the speaker), while the remaining three (all painted black) are hollow steel tubes. Once assembled, the stands are quite resonant, so a bit of mass-loading with sand or similar would help.

These stands still do the job of supporting the speakers well, enabling the K1’s presentation to have a good sense of space and dynamic subtlety. Things aren’t perfect, though: they lack the precision-engineered feel we would expect from something selling at this price, and we also find that the supplied floor spikes are hard to lock in place and come loose easily over time.

It wouldn’t take anything more than a conventional set of hexagonal lock nuts that can be tightened by a spanner to fix the issue. We can’t understand ProAc’s decision to use round lock nuts that can only be finger-tightened instead. A small point, but annoying all the same.

Compatibility

But enough of stands and cosmetic issues, it’s in the sonic engineering where these speakers ultimately prove their worth. The K1 are a two-way design that makes use of ProAc’s well-proven ribbon tweeter with its machined faceplate, damped rear chamber and Alnico magnet assembly. We’ve heard this tweeter in other ProAc models and it has always impressed with its high levels of insight and refinement.

Here, it’s combined with a rather esoteric-looking 16.5cm Kevlar mid/bass unit, which is based on the one used in the larger K3 floorstanders. Various aspects of the driver have been tweaked to account for the differing technical needs of the two speakers.

A high-quality, carefully calibrated crossover blends the two drive units and results in a reasonably high sensitivity of 90dB/W/m and 8ohm nominal impedance. ProAc tends to make speakers that are relatively kind loads for amplifiers to drive and this one appears to be no different.

That isn’t an excuse to skimp on the partnering electronics, though. As the price level demands, these are highly revealing speakers that will show up any shortcomings in the signal chain that feeds them.

Such is the K1’s sonic quality, we suggest being as ambitious as you can. They sound right at home at the end of our reference Naim ND555/555 PS DR music streamer and Burmester 088/911 Mk3 amplifier combination, which together costs around ten times as much as the speakers themselves. 

We also have our usual Technics’s SL-1000R/Kiseki Purple Heart MC record player to hand, as well as Chord’s DAVE DAC/Ultima 5 digital controller/power amp combo, just to see how these standmounters cope with different sonic signatures.