| Fusée à la Framboise | |
|---|---|
| Author | kleo |
| Type | Payload Senders (Hardware) |
| Version | build ed62277 |
| License | BSD-3-Clause |
| Last Updated | 2021/09/01 |
| Download | |
| Website | |
| Source | |
Fusée à la Framboise is a Raspberry Pi OS image that loops Fusée Gelée over and over again.
Includes hekate v5.5.8 & Nyx v1.0.5 and Atmosphere fusee-primary 0.19.3 payload images.
Note: Fusée à la Framboise is now replaced by Fusée à la Alpestre, which is a faster and smaller image.
User guide
What you need:
- Raspberry Pi 3 B, Zero or Zero W.
- A power bank (500mA output works, but 1A is recommended).
- A USB hub (no need for it to be powered).
- A USB A > C cable, for transmitting to the Switch (do not get an old/no-brand one, it may wreck your Switch or USB source. (why?))
- An A > MicroUSB cable, for powering the Pi.
- A MicroUSB > A cable, for USB output from the Pi (one of these should come with a Pi Zero kit).
Setup:
- Download a fusee-framboise image, or build one yourself.
- Extract the release .img file, and flash it to your Pi's SD card (the authors recommend Etcher for a flashing tool.)
- Plug in your USB Hub before you power on your Pi. (why?)
- Power on your Pi via your power bank.
Usage:
- After your Pi has (hopefully) booted, you'll just need to plug in your Switch to the hub via the USB-A > C cable, and enter RCM.
- The payload will be automatically executed.
Media
Fusée à la Framboise (Kleo Bercero)
