LP® SmartSide® Precision Series Treated-Engineered-Wood lap siding is available in 3/8 and 7/16 Performance Categories (nominal thicknesses of 9.5 and 11 mm, respectively), in nominal widths of 150, 205 and 305 mm and in lengths up to 4,875 mm.
In respect to this, what is the difference between SmartSide 38 vs 76?
Other than material thickness, one main difference is 38 Series Lap Siding may be installed on studs spaced a maximum of 16 inches o.c. whereas 76 Series Lap Siding may be installed on studs a maximum of 24 inches o.c.
Likewise, what can I use for shed siding? 9 Popular Shed Siding Options [#2 is My Favorite]
- #1 Vinyl Siding.
- #2 LP SmartSide Siding Panels – Engineered Wood Siding.
- #3 T1-11 Shed Siding.
- #4 Board-And-Batten Siding.
- #5 Tongue-And-Groove Boards.
- #6 Bevel Siding.
- #7 Channel Siding.
- #8 Cedar Shingles.
Besides, can LP SmartSide panels be installed horizontally?
No. LP SmartSide siding is designed for horizontal installation only. Un- grooved LP SmartSide Precision series panel siding is available for board and batten applications. Refer to the installation instructions for proper installation.
What is smart siding made out of?
Material: LP SmartSide siding is a manufactured wood product. It is coated with SmartGuard®, LP's proprietary sealant, which includes waxes, zinc borate and other advanced binders to make it resistant to water and termite damage.
What is LP SmartSide lap siding?
Description. LP® SmartSide® products combine the rich cedar-grain texture of traditional wood siding with the advanced performance of treated engineered wood — to help extend its curb appeal for years to come. The beautiful look of real cedar siding with added durability and less maintenance required.
Is LP siding fire resistant?
LP SmartSide is a class C (III) rated product when tested according to ASTM E84. All LP SmartSide siding can be used in a 1-hour fire rated assembly when it is installed over 5/8 type-X gypsum, which is consistent with other siding types such as fiber cement siding.
Can you use screws on LP SmartSide?
Use minimum 8d (0.113 inch diameter shank), hot-dipped galvanized (ASTM A153 or equal) nails with a 0.270 inch diameter head for 38 Series and 76 Series panels when fastening to wood framing. Do not use electroplated fasteners.
What is the R value of LP SmartSide?
The siding has an R-value of 4, which means it provides the equivalent insulating value of four inches of wood. Of the three types of composite siding, fiber cement siding is the least energy efficiency. With an R-value of 0.5 to 0.6 of R-1, it does not add any significant insulating value.
How do you install t111 siding?
T1-11 siding is designed for installation on framing with standard 16-inch spacing. You can attach them with exterior screws or galvanized nails. Wrap the house with house wrap or 15 mil tarpaper. Staple the material to the studs with a staple gun and cut openings for doors and windows with a utility knife.
How do you install plywood siding panels?
How to Install Exterior Plywood Siding
- Nail metal flashing around all windows, doors and other openings in the wall with flashing nails and a hammer.
- Use a tape measure and level to snap a level chalk line around the house to mark the bottom of the siding.
- Set the first full panel at the house's back corner that is most visible from the street.
Can LP SmartSide be used indoors?
Re: LP smartside interior
Should work OK. Yes, you would have to caulk around the grooves if it's behind an outlet or baseboard. It has to be painted to protect it from water, but that's not an issue indoors. If water gets to the bottom edge and sits there, it will wick up and ruin it.Can Hardie siding be stained?
Hardiplank siding is a long-lasting, fireproof building material that resembles natural wood. Because it is a concrete-based product, it cannot be stained in the traditional sense. However, there are products on the market that give fiber cement board a stained look.
How do you nail t1 11 siding?
How to Nail T1-11 Siding
- Hold the first sheet of T1-11 siding against the building's wall studs with the edge of its inside shiplap seam covering a wall stud.
- Tack the top center of the T1-11 to a wall stud with an 8d galvanized nail, using a hammer to drive the 8d nail.
What is better than t111?
T1-11 is a cheaper solution for a strong wood siding for a shed, but it will cost you more in the long run. Wood sheds used to be made with T1-11 siding, also known as plywood. While T1-11 siding is cheaper, it cannot stand up to the elements of mother nature as well as LP® wood siding and requires yearly maintenance.
Is t1 11 good siding?
T1-11 siding is strong, highly functional and durable – it has a long life as compared to other sidings. However, for many in the building community, it is thought of as cheap and is considered a low-quality material.
What kind of nails do you use for siding?
What kind of nails do you use to hang vinyl siding? Use electro, or hot-dipped galvanized steel or aluminum roofing type nails with a diameter of 1/8″ and a nail head of 3/8″ or larger. The nails should penetrate 3/4″ into a solid wood base.
What should I use for chicken coop siding?
Exterior grade plywood: Plywood is very common siding material for outbuildings, and for good reason. It provides excellent, cost-effective structural rigidity, it is easy to work, it is readily available in most parts of the USA, and it provides an excellent surface for weather-proof siding or painting.
What is the best material for shed walls?
Top 5 Options for Exterior Shed Wall Material
- Vinyl Shed Siding. Vinyl siding is made of polyvinyl chloride (PVC) and comes in a wide variety of colors and textures.
- Engineered Wood Siding. Engineered wood is made up of composite wood- a mixture of fibers and other kinds of wood.
- T1-11.
- Fiber-cement.
- Metal Shed Siding.
Will painted OSB last outside?
3 Answers. There's no such thing. OSB will swell, warp, and degrade unless it's kept safe from sunlight and perfectly dry. No paint will do this.
What kind of wood should I use for a shed wall?
The two most common choices are redwood and cedar. Both are attractive enough to leave unfinished and complement the rough-sawn appearance of T1-11. If you plan to paint the shed, consider PVC trim boards as a low-maintenance alternative to wood.
How do you waterproof a shed wall?
Waterproofing a Shed – 5 Steps to Keep your Shed Watertight
- Damp and Moisture from the Ground. The first stages of waterproofing a shed come before you even put it up.
- Use the Right Timber Treatment.
- Add Shed Felt to your Roof.
- Shed Insulation.
- Use Waterproof Paint.
- Permagard - Providing Solutions.
