The GE XL44 is a free-standing gas oven range that uses the home’s gas supply line to fuel the stove burners. The cook top has four burners that are divided into pairs. There are two pilots for the stove that must both be lit in order for all the stove burners to work. The pilots are lit with a match.
Where is the pilot light on GE XL44 oven?
You will find the pilot at the back of your oven, attached to the oven burner’s left side. Keep holding the oven control knob for a minute after you have a pilot flame, then release the knob. Relight the pilot if it does not stay lit, while pushing in the oven control knob.
Why is my GE oven not working?
Unplug your GE electric oven and check the fuse. The fuse is usually located in the main house fuse box on the back of your unit. The location may vary with different models, so refer to your unit’s manual. If the fuse looks smoky or black, it is likely blown.
How many cubic feet is the GE XL44?
These names were given to denote a particular feature or set of features. The name XL44 was given to certain gas ranges because of the extra large oven cavity, which was 4.4 cubic feet and one of the largest oven cavities on the market today.
Can I manually light my gas oven?
Answer: No, this is not possible due to the gas being controlled by the gas safety valve. You need the ignitor to be working properly before gas is allowed out of the gas safety valve.
How do I change the igniter on my GE XL44?
How to replace the igniter on a GE XL44 oven
Step 1: Remove the lower panel of the oven. Step 2: Remove the oven floor. Step 3: Remove the metal shield that protects the wiring. Step 4: Remove the shield that covers the hole where the wiring goes out the back of the oven.
How do you start a GE gas oven?
Locate the pilot in the back of the compartment. The pilot is attached to the left side of the oven burner. To light the oven pilot, push in and hold the oven control knob in for 1 minute before releasing. Put a lit match next to the pilot so that the pilot will ignite.
How do you test a gas valve on an oven?
To test the oven safety valve, measure between the two terminals, on the valve and look for continuity. The resistance here is low, but you should be able to detect 1 to 1.5 ohms.
Where is the pilot light on my oven?
Locate and light the pilot light: It’s often labeled “pilot light,” and can be a small hole in the bottom of the oven, front center near the door opening, or in a back corner. If you don’t see it inside the oven, it could be in the back of the broiler compartment. Use a microfiber cloth to wipe down the area.
Why does my gas stove work but not my oven?
In most common cases, this specific issue means that the broil element and the baking element remain functional. However, there’s probably a blown internal fuse. If it’s not the fuse, it could be the temperature sensor, broken or frayed wiring, or even a breakdown of the oven control board.
Why is my GE gas oven not turning on?
Check the power supply: Check the house fuse or circuit breaker box to be sure the breakers are ON or that the fuses are good. On ranges, check the power cord to make sure it is plugged fully into the wall outlet. The power cord might be unplugged or loose.
Why did my oven suddenly stop working?
An oven that won’t heat is usually the result of a faulty igniter (for a gas oven) or heating element (for an electric oven). If both your gas oven and your gas burners have stopped working, the problem is most likely with the gas line, and will require professional repair.
How old is my general electric stove?
GE Appliance – How to Determine the Age or Manufacture Date
Our serial numbers begin with two letters, followed by six numbers, with a letter at the end. The two letters at the beginning of the serial number tell you the month and year it was made.
Where is GE range model number?
Behind the rear control panel. From the front of the range, reach behind the middle of the rear control panel and feel for a metal flag. Rotate the metal flag up to see the model label.
How do I open the top of my GE gas stove?
As you begin to pick up the lift top, release the spring clips by inserting a putty knife between the top and the clips. The clips will be located in the front or on the sides of the oven. The lift top can now be removed or propped open with a large pole or stick depending on the model of your gas oven.
How do you bypass an oven igniter?
How to Bypass the Electric Ignitor on a Gas Stove
Unplug the stove’s electrical cord from the wall outlet or turn off the circuit breaker that supplies it with power. Remove the burner grates and lift the stove top if you wish to use a burner. Open the oven door and remove the racks if you wish to use the oven.
Can I light a gas stove with a lighter?
Most gas stoves can be lit with a match or lighter if your igniter is broken. To ignite your match or lighter, turn the gas dial to medium. Hold the match or lighter close to the burner and wait for it to ignite. Remove your hand as soon as possible.
Can you use a gas oven when the power is out?
On most gas cooking stoves, the top burners can be lit with a match if the electric power fails and the electronic burner ignition goes out. To light a top burner with a match, hold a lighted match to the burner and turn the burner control knob to the low-flame position.
