Husqvarna 445 Series 45.7CC 2-Cycle 18-in Gas Chainsaw.
What size chain does a Husqvarna 445 take?
Husqvarna 445 Chainsaw Chain 18″ (45cm) – Oregon 95TXL072E – 72 Drive – NewSawChains.
What size bar does a Husqvarna 445 have?
050″ Gauge 3/8″ Pitch 28″ Power Match Bar , White.
What type of gas does a Husqvarna 445 chainsaw take?
All Husqvarna chainsaws use the ratio of 50:1, this means that for every gallon of gas you will use 2.6 oz. of 2 stroke engine oil. Even though your owner’s manual may say 87 octane, always use 89, just to be safe, and to prevent “knocking” which could be damaging to your engine.
What is E series Husqvarna?
Husqvarna’s 450 e-Series Chainsaw features an X-Torq engine for lower fuel consumption and reduced emission levels. Auto return stop switch and visible fuel level makes the saw easier to handle. Smart Start ensures easy starts.
Can you use an Oregon chain on a Husqvarna chainsaw?
Chainsaw Bar & H78 Chain, Fits Husqvarna, Poulan, Makita, Craftsman, Jonsered, McCulloch and more (577330) This product is only available through retailers or servicing dealers.
Can I use a Stihl chain on a Husqvarna saw?
Unfortunately, you won’t be able to use Stihl chains on Husqvarna saws because of the difference in pitch sizes.
What is the difference between .325 and 3/8 chain?
The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.
Can you put any bar on a chainsaw?
Not every bar or chain is right for every saw. For example, larger chainsaw bars work best with more powerful saws because it takes more energy to drive a chain around a long bar. That’s why electric saws use bars 18″ and shorter. Similarly, chainsaw chains are measured to fit certain bars.
What do the numbers on chainsaw chain mean?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The first number represents the pitch: 1 = 1/4″ 2 = 0.325″
Should I use high octane gas in my chainsaw?
To start, both Stihl and Husqvarna recommend the use of high octane unleaded gasoline. Both brands of pro saws are designed to burn fuel rated at 89 octane or higher. Most regular grade fuel has an octane rating of about 87.
Can you use 2 stroke oil for chainsaw chain?
Can You Use 2 Cycle Oil As Bar Oil? You should only use two-cycle oil as the mix, never as a chainsaw bar oil alternative. Using two-cycle oil on the bar will not provide enough tackiness to stick to the chainsaw chain in the summer months. Two-cycle oil also will not work in the winter.
What octane gas is best for chainsaw?
Use a minimum of 89 octane gasoline and always use fresh fuel. Only buy enough gasoline that you can easily use up within a two- month period. For air-cooled, two-cycle engines, use a quality mix oil that meets the engine manufacturer’s recommendations.
What is the oil to gas ratio for Husqvarna chainsaws?
The correct mixing ratio for your Husqvarna is detailed in your product’s owner’s manual. But as a general guide, a fuel-to-oil ratio of 50:1 is recommended for Husqvarna products up to and including 75cc. That comes out to 2.5 fluid ounces of oil per 1 gallon of gas.
