Diamond Brite
With a life expectancy of 10 to 15 years, and with a stunning appearance, it is an excellent choice for some pools. This option provides the best bang for the buck – it is truly beautiful and durable, but it just doesn’t feel as luxurious as our all-time favorite plaster, Hydrazzo (see below).
What is Diamond Brite in a pool?
Diamond Brite is an exposed aggregate pool finish made from a blend of natural quartz aggregate, cement modified with polymers and fade-resistant color-quartz, which is available in a large number of stunning varieties.
How long after Diamond Brite Can you swim?
The filter can be set for normal operation with a Diamond Brite pool. Do not swim in the pool until there is no longer evidence of plaster dust in the water and chemicals have been balanced. Do not use the pool sweep cleaner for at least ten days subsequent to the application of plaster or Diamond Brite.
Which is better Pebble Tec or Diamond Brite?
Pebble Tec is more durable than Diamond Brite and can continue to give you service for years without getting damaged. Pebble Tec is mainly used for new swimming pools, while Diamond Brite works best when resurfacing an old facility. The two products make a pool to be more attractive and make it more welcoming.
What is the longest lasting pool finish?
Tile Finishes
Though tile is the most expensive pool finish and takes longer to install than plaster and aggregate, it’s the longest lasting pool surface. With proper application and minimal maintenance, tiles should never need to be replaced. Tile pool finishes come in ceramic, porcelain, glass and stone.
What is the most popular Diamond Brite color?
Common colors for Diamond Brite pools include Cool Blue, Onyx, Ivory, Oyster Quartz, Aqua Quartz, and Verde. However, our favorites are Tahoe Blue and French Gray.
How often does a pool need to be resurfaced?
It varies depending on the type of pool, with plaster or cement pools needing to be resurfaced every 3-7 years while fiberglass pools can sometimes go as long as 15-30 years.
Can you pressure wash Diamond Brite?
First off, I would never use anything but a very low pressure (1200 psi or less) pressure washer on a pool surface. For a green pool I would use a chlorine rinse to kill all algae. You can even pick up a chlorine sprayer at most Home Depot’s or Lowes stores.
How long does it take Diamond Brite to cure?
Allow BOND-KOTE to cure for at least six (6) hours before plastering. The plaster should be applied to BOND-KOTE within three (3) to five (5) days. If left for a longer period before the finish is applied, ensure Bond Kote is clean and free of dirt, efflorescence, and other contaminants.
How do you clean Diamond Brite pool surface?
Remove rust stains from the bottom of your pool.
Pour vinegar on the stain to completely cover the area. Repeat pouring vinegar on the stain and let it sit for another 20 minutes.Scrub the stain with a scrub brush. Rinse the vinegar from the Diamond Brite with clean water. Put on rubber gloves.
How long does a pool surface last?
The reality is, most plaster pool surfaces are designed to last about 10 years. After that, the surface can show common signs of aging that are aesthetically unappealing, uncomfortable for swimmers, and degrading to the value of your pool and overall property.
Is Pebble Tec still popular?
Pebble Tec® is a newer trend and has become popular in the last couple of decades for good reason. While it is more expensive than plaster, it is the highest quality pool resurfacing material available due to its longevity and ability to hide chemical residue.
What is better than Pebble Tec?
River rok is good alternative, stones are somewhat smaller and smoother than pebble tec. Can also custom the colors to your liking.
How long does Pebble Sheen last?
Durability: A Pebble Tec surface should last 20+ years with the proper care and maintenance. A plaster pool should be re-plastered approximately every 5 years.
