In the US, most commonly used, a standard size of cinder block is 16 inch long by 8 inch high by 8 inch depth, which is represented in inch as 8″×8″×16″ or in mm as 200 × 200 × 400 (depth × height× length).

What are the different types of concrete blocks?

There are two primary concrete block categories: hollow and solid. Both of these concrete block types are typically used during the construction of walls, but can be used for other purposes as well. Not all solid concrete blocks are fully solid, as you’ll see, but they’re more solid than hollow blocks are.

What are the types of blocks?

Types of Concrete Blocks or Concrete Masonry Units Used in Construction
Types of Hollow Concrete Blocks:Concrete Stretcher Blocks.Concrete Corner Blocks.Concrete Pillar Blocks.Jamb Concrete Blocks.Partition Concrete Block.Lintel Blocks.Frogged Brick Blocks.

What are the 4 types of building blocks?

Aerated concrete or ‘aircrete’ block. Hemp block. Unfired clay block. Insulated concrete form (ICF) blocks.

What are large concrete blocks called?

Jumbo Concrete Blocks: Large Concrete Blocks for Walls: Hartford, WI.

Which block is best for construction?

AAC bricks are in high demand, owing to their high strength, load-bearing and thermal insulation properties. AAC block is used as a construction material for interior and exterior structures.

What is the actual size of a 200 mm concrete block?

In 1979, the industry switched to metric sized blocks based on the following dimensions – height of 200 mm, length of 400 mm, width ranging from 100 to 300 mm. After accounting for 10 mm of mortar, the actual dimensions of the blocks are 190 mm by 390 mm by between 90 and 390 mm.