Screw Sizes

For screws measured in inches, diameters of 1/4 inch and smaller (for machine and sheet metal screws) or 5/16 inch and smaller (for wood screws) are expressed with a # and a whole number (ex., a screw with a major diameter of 3/16 inch is a #10 screw). Smaller numbers indicate smaller diameters.

Is a #10 or #12 screw bigger?

Machine screws are often found in sizes of: 0, 1, 2, 3, 4, 5, 6, 8, 10, 12, 14—the larger the number, the larger the screw.

What does a 10-32 screw mean?

The number “10” is a size designator with no numerical meaning. The number “32” refers to 32 threads per inch. You can identify a 10-32 screw by measuring the diameter at exactly 3/16″ (4.76 mm).

How do I know what size screw I need?

The general rule of thumb is that the screw should enter at least half the thickness of the bottom material, e.g. 3/4″ into a 2 x 4. The other factor is the screw’s diameter, or gauge. Screws come in gauges 2 through 16. Most of the time you’ll want to go with a #8 screw.

How do I measure screw size?

To measure the diameter of screws and bolts, you measure the distance from the outer thread on one side to the outer thread on the other side. This is called the major diameter and will usually be the proper size of the bolt.

What is a 8 32 screw?

The first number is the diameter. The bigger the number the bigger the screw. The second number is the number of threads per inch.

What is a #12 screw?

The diameters listed in the chart below are in fractions of an inch, so the #12 is just shy of 1/4 inch. A more detailed table with thread count can be found below, along with tap drill sizes. Detailed screw sizes charts. Screw and Tap Drill sizes.

Is a #10 bolt the same as 3 16?

You are correct, #10s are interchangeable with 3/16, and #12s are 7/32.