The 4.80 x 8 tire size like the Kenda K371 Bias Trailer Tire, part # AM10004, is 16.1 inches tall and the overall width is 4.6 inches.

What does 4.80 8 mean on a tire?

Lawn tractor tires using the two-number system display numbers as 4.80-8, for example. This means the tire’s width is approximately 4.8 inches and the rim is 8 inches in diameter. Those are the only two numbers you need to find the right size replacement tire.

How wide is a 4.80 8 tire?

The overall diameter of a 4.80/4.00-8 tire is 16.1 inches.

What does 4.00 8 mean on a tire?

4″ = refers to the diameter of the rim, in inches

For example, a 4.80/4.00-8″ tire typically has a 15.5″ diameter rather than the 16″ diameter you would expect. However, it is considered an adequate replacement as it meets industry standards.

What does 4.80 mean on a tire?

On your current tires, the 4.80 number represents the section width of the tire, or the width across the tread. The second number is the wheel diameter size. You have a wheel that has a 8 inch diameter.

How tall is a 4.10 tire?

So a 4.10/3.50-4 tyre is 4.1″ wide, 3.5″ tall on the sidewall and fits a 4″ rim. This tyre would therefore have the appearance of a low profile tyre.

What is the next size up from 4.80 8 tire?

If you were looking to go with a larger diameter wheel, you’ll need to go with a wheel that uses the same bolt pattern as your existing wheel. Tires meant for a 10 inch wheel would all likely be too wide for your trailer, so the next largest tire size would be 4.80-12.

How are wheelbarrow tires measured?

A common sizing system for wheelbarrow and hand-cart tires are 2 numbers, separated by a hyphen. The size could also be a series of 3 numbers separated by an “X” or a “/”. The two most common sizes are 4.00 – 6 and 4.10 – 6. The first number is the height of the tire sidewall, and the second number is the rim diameter.

What size tire is 5.70 8?

The 5.70-8 tire size is about the largest diameter tire available for an 8 inch rim. Your current tire is about 18 inches in diameter and has a tread width of 5.9 inches. A 215/60-8 tire is about the same diameter, but has a wider tread width at 8.9 inches.

What does 4.10 6 mean on a tire?

You will see 4.10/3.50-6 on the tire. This means the tire is 4.1” in width, 3.5” in tire height (rim to outer edge) with a 6” rim height.

What does 3.50 8 mean on a tire?

This tube is for a rim (metal part of a wheel) which has a diameter of 8″, thus we are OK so far. In our cases, 3.50 refers to tire width and in this nomenclature case (“3.50 – 8”) 3.50 is also the distance from tire edge to the rim (or the sidewall distance).

What does 4.80-12 mean on a tire?

Yes, a 4.80-12 trailer tire uses a 12 inch diameter wheel that is 4 inches wide. The 4.80 spec is the width of the tire. I have attached a link to all of our 12 inch x 4 inch trailer wheels for you to check out. They come with either a 4 on 4 inch bolt pattern or a 5 on 4-1/2 inch bolt pattern.

What size are wheelbarrow wheels?

The typical replacement wheelbarrow wheels come in 13” to 16”. You can also get a wheelbarrow assembly kit with your choice of wheel size and all the equipment needed to replace the wheelbarrow wheel.

What is the difference between 4.80 and 5.30 tire?

Expert Reply: The two tire sizes you referenced, 4.80-12 and 5.30-12, both fit 4-inch wide rims, but they differ in their overall diameter. A 4.80-12 tire/wheel when fully inflated will have a diameter of 20-1/2-inches while the 5.30-12 size will be just under 22-inches in overall diameter.