Standard Depth vs Counter Depth

Standard Depth vs Counter Depth

Generally speaking, a kitchen’s counters will arrive at around the 25-inch mark when their depth is measured and cabinets are typically 24 to 24 1/2-inches deep. This means that today’s standard refrigerators, at approximately 30 inches in depth, will protrude by several inches from the edge of your countertops.

Is counter-depth more expensive?

Counter-Depth Appliance Costs

Counter-depth appliances typically cost about 15 to 20 percent more than standard refrigerators that have comparable features, and it is not uncommon for the appliance to be slightly smaller in capacity.

Do you lose space with a counter-depth refrigerator?

By shaving off a few inches, counter depth refrigerators offer a shallower build than their standard depth counterparts. However, the disadvantage to this is that you lose some interior space and will have less storage capacity for food items.

Are counter depth refrigerators worth it?

The Benefits

Many will choose a counter-depth refrigerator simply because this style gives the kitchen a more uniform profile. The refrigerator does not protrude several inches past the counter. More convenient access to contents. Finding and retrieving contents from a counter-depth refrigerator is much easier.

How far should a fridge stick out past the counter?

Do Fridges Need Space Around Them? In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you’ll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.

How much space should be in front of refrigerator?

The National Kitchen and Bath Association offers these guidelines for minimum landing space: Near the fridge and wall oven, leave 15 inches on both sides (if necessary, one side can be 12 inches).

Is counter-depth the same as built-in?

Built-In Refrigerators are at counter depth including the doors and will not stick out into the walkway of your kitchen. These types of refrigerators have the option to blend in with the rest of the cabinetry by installing cabinet panels on the front.

Are all fridges the same depth?

Counter-depth refrigerators are typically under 30 inches deep. By contrast, most full-size refrigerators are over 30 inches deep, often in the 35- to 36-inch range. So, in many kitchens, traditional refrigerators may stick out half a foot or more from the edge of the kitchen counters.

Will a 36 inch refrigerator fit in a 36 inch opening?

Yes, it should. Mine measures 35.75″ wide. Sorry, there was a problem.

Are counter-depth fridges wider?

With a refrigerator depth between 23 to 27 inches, counter-depth fridges are typically wider and taller than standard-depth fridges to compensate for the reduced volume and to be more space-efficient. Counter-depth units usually have French doors or side-by-side doors.

How deep is a standard countertop?

Countertop depth standard measure is 25 ½ inches, though this varies based on appliance depths, room size, base cabinet size, and the backsplash details. Having a standard depth countertop helps maximize your space and enhances the look of your kitchen.

What is a French refrigerator?

French door refrigerators are the latest trend in refrigerator design. These refrigerators have two refrigerator doors that open outward, with the split in the middle. They can open individually or both together. The idea is that by opening both, you are opening up the entire space – making everything clearly visible.

How far should a refrigerator be from the back wall?

Rear — This is where the most clearance is needed. The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient.

How many inches deep is a counter-depth fridge?

Most counter-depth fridge dimensions top out with a depth of around 30 inches. By contrast, traditional refrigerators can be as deep as 36 inches. To make up for the shallower depth measurement, standard counter-depth fridge dimensions tend to be wider (around 36 inches).

recommended posts

sao paulo antecipou o feriado de 9 de julho confira isto feriado 9 de julho foi antecipado
como e feito o teste de aptidao fisica confira isto atestado de aptidao fisica
quien es la nina de los stickers de whatsapp confira isto bebe chinita de los stickers
como calcular a concepcao confira isto calculadora da concepcao
que quiere decir la palabra trascender confira isto significado de transcender


 

Maya Lin-Takahashi
Author

Maya Lin-Takahashi

Maya is a hardware enthusiast who tests and reviews smart home devices, smartphones, wearables, and audio gear. She focuses on practical consumer value and build quality.