Timbor is made from the element Borate, which is a natural occuring element in the earth. It is very safe and non-toxic.
What is the difference between Bora care and timbor?
Timbor is used at 1.5 lbs of Timbor to each gallon of water. Bora-Care is mixed 1:1, one gallon of Bora-Care to one gallon of water which will make two finished gallons.
What is the active ingredient in timbor?
The active ingredient in Tim-bor is DOT — Disodium Octaborate Tetrahydrate — a non-corrosive borate mineral salt that is deadly to drywood termites and other listed pests that will not break down over time. When sprayed on wood, it penetrates and provides years of residual protection.
Is timbor boric acid?
Tim-bor Professional’s active ingredient is Disodium Octaborate Tetrahydrate (DOT), a natural borate mineral salt and micronutrient.
How long does a Timbor treatment last?
The manufacturer states that Timbor will last for the life of the wood as long as the wood is not exposed to rain or flooding. It will stay in the wood forever because of how it bonds to the cells of the wood.
What is Timbor treatment?
What is Timbor? Timbor is an insecticide, fungicide and wood preservative for the protection and treatment of lumber against fungal decay and wood destroying insects (including termites, beetles, and carpenter ants). Timbor gets its preservative power from the active ingredient DOT (disodium octaborate tetrahydrate).
How long does Bora-Care take to work?
Answer: Bora-Care will take at least 30 days usually to diffuse through the entire piece of wood. This of course depends on the thickness and moisture content of the wood. It starts to work as soon as it begins to penetrate the wood it is applied to.
How long does Bora-Care last on wood?
How long will Bora-Care stay in the wood? Since Bora-Care is derived from minerals, once the active ingredient diffuses into the wood it will remain indefinitely. There are no natural forces that will degrade or break down the product inside the wood.
How long does it take for Bora-Care to dry?
Answer: You should allow areas treated with Bora-Care to dry for 24-48 hours before touching or painting them. Most applicators apply two coats of Bora-Care for best results.
Does TimBor work for mold?
Answer: Timbor is not labeled to treat mold at all and will not work for this use.
How do you apply TimBor?
Spray TimBor: The Tim-bor solutions or foam should be applied evenly to wood using a medium to coarse spray at low pressures (20-30 psi). Application rate is 1 gallon per 200 square feet of wood surface area. Ensure that all accessible wood surfaces are thoroughly wetted.
What is Boracare made of?
The active ingredient in Bora-Care®, disodium octaborate tetrahydrate, is a borate salt compound that is formed from a union of boric acid and borax.
Which is better borax or boric acid?
When it comes to killing pests, your best bet is boric acid. Borax should not be used as a pesticide, though some people confuse the two or think they are the same. Borax can kill pests, though it is not nearly as effective as boric acid. You will often find boric acid used in pesticides.
Can I sprinkle borax around my house?
Control Pest Problems
As the weather warms up and more pests in your home and around your yard, apply a thin layer of borax around infested areas. Bugs like roaches, ants, and fleas won’t stand a chance, because borax is also a desiccant.
Is borax and boric acid same?
Boric acid is made from the same chemical compound as borax and even looks like it. But while borax is commonly used in cleaning, boric acid is mainly used as a pesticide. Boric acid kills insects by targeting their stomachs and nervous systems.
Can you paint over Timbor?
Answer: Yes, as long as the application of Tim-bor Professional is completely dry, you can use a latex or other paint/stain product.
What is Bora care termite treatment?
Bora-Care Termiticide is a plant-based termite treatment for wood that is injected directly into the infested areas. The active ingredient in Bora-Care is borate salt, which safely and effectively controls termites, ants, and other pests by interrupting their ability to process the food they eat.
How does disodium Octaborate Tetrahydrate work?
Borate compounds like Disodium Octaborate Tetrahydrate utilize a stop-feed mode of action. Stop-feed means that the active ingredient DOT disrupts the enzyme and digestive systems of the insect, preventing future digestion and causing death by starvation.
