The TWP 1500 provides higher UV protection than the 100 Series. The 1500 Series is user-friendly and easy to maintain. It enhances the wood’s beauty and prolongs the life of all exterior wood surfaces. The absorption rate is a bit slower than the 100 Series but dries in 4-12 hours on average.
How long will TWP stain last?
Most TWP stained surfaces will last 2-3 years before a recoat is needed.
Is Twp 200 a good stain?
TWP 200 Series is especially effective on aged shakes and shingles that have been overexposed to harmful UV rays. It can restore flexibility and appearance to dry brittle shingles and wood siding. The review of TWP 200 Series found it to be resistant to mold and mildew unlike other oil based stains.
What is Twp deck stain?
TWP 1500 is a Semi-transparent Oil-Based wood stain and preservative that is allowed in all 50 states. The new TWP 1500 formula is designed to penetrate better, dry faster and outperform the previous TWP 500 series formula.
Can you stain over Twp?
TWP is a semi-transparent stain that adds color while allowing the wood grain to show through enhancing its beauty. If TWP dries shiny then that suggests it was over-applied. In the case of applying deck stain, more is not always better. You only want to apply as much stain as the wood will soak up.
What colors does Twp come in?
TWP 1500 enhances the natural beauty of the wood grain and is available in 9 different stain colors. TWP stain colors for the 1500 Series are Cedartone, Redwood, Dark Oak, Black Walnut, California Redwood, Honeytone, Rustic, Pecan, and Natural.
Who manufactures Twp stain?
TWP® stands for “Total Wood Preservative/Protectant” and has been manufactured by Gemini Coatings for over 25 years. TWP® 1500 Exterior Wood and Deck Stain is registered as an EPA Wood Preservative and is manufactured using only the highest quality of raw materials.
Does Twp stain require two coats?
Apply TWP stain with a brush, roller, or pump sprayer. The first coat should be a saturation coat. If the first coat of TWP stain soaks into the wood immediately a second coat may be necessary applied “wet on wet” within 30 minutes of the first coat.
Is Twp oil or water based?
TWP 1500 stain is a semi-transparent oil-based wood preservative registered by the EPA. The only deck preservative that is currently registered as an exterior wood preservative.
Is Twp stain water based?
Benefits of using TWP® (Water-Based) WS Series: Repels water longer. Resists warping, cracking, splitting and freeze damage. Stops UV damage.
Is Twp oil based?
TWP 100 Stain by Amteco® TWP 100 Stain is one of the BEST semi-transparent oil based stains on the market. TWP 100 Series is an EPA registered wood preservative which contains a unique combination of chemicals which preserve and enhance the natural warmth, beauty and integrity of new and old wood.
Is TWP a sealer?
One of the best lines of deck sealers is TWP (Total Wood Preservative). A deck sealer like TWP will preserve exterior wood and protect from harsh elements that cause water and UV damage.
Can you spray Twp?
A low-pressure pump sprayer can be a good choice but you will need to be careful with overspray and an even application. Using these tips below will help to ensure your TWP Stain is applied evenly, with a faster application time. Note: These spraying tips can also apply to using an airless sprayer.
How much TWP stain do I need?
The specified coverage rate for TWP is 150-200 square feet per gallon for the first coat. Second will apply at 200-300 per gallon. This averages to about 100-125 sq. feet per gallon for 2 coats wet on wet..
What temp can you apply TWP stain?
TWP should dry uniformly flat with no glossy areas. Only apply TWP when the temperature is 50-90° F. Do not apply TWP when rain is expected within 48 hours of application. Mix TWP thoroughly before and occasionally during use.
When can you walk on TWP stain?
Allow to dry to touch overnight. Walking on TWP 100 before it is dry will cause tracking. Because horizontal surfaces are subject to harsher conditions (foot traffic, standing water, deck furniture, spills, etc.) than vertical surfaces, they may require more frequent maintenance coats.
How do I Restain Twp?
Apply any of the TWP Wood and Deck Preservatives using a brush, stain pad, roller, or garden pump sprayer. It is best to start up top on high surfaces like wood siding or gazebos and to work your way down. On decks, stain the railings first before staining the deck floor.
