The e2 Weight Distribution Hitch, # FA94-00-1000, is a sturdy system that has 2-Point Sway Control and comes with a 10-year warranty. The unique design of this system does allow you to back up without having to disconnect the sway bars.
How does an e2 hitch work?
The e2’s rigid brackets provide two points of steel-on-steel friction, constantly working to fight sway. Its unique design provides a level ride while minimizing sway caused by winds, semi trailers and sudden maneuvers. The e2 hitch comes in round-bar and trunnion styles.
Who makes the e2 hitch?
Fastway e2 Hitch, Round Bar, 10,000-lb.
Should I remove weight distribution bars before backing up?
If using a weight distribution system that does not come with sway control at all then backing up would not be an issue unless making severe turns (jackknifing the trailer) and you would want to remove the spring bars ahead of time.
Can you put too much tension on weight distribution bars?
Expert Reply: If you have the spring bar tension set up too high you can see ride issues. Typically it’s a very harsh ride quality but sway is possible too. The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow.
Is fastway and equalizer the same?
Equalizer is a very well-known brand of weight distribution system that people are so familiar with that some just refer to all weight distribution systems as equalizer hitches. Fastway weight distribution systems are made by the same company as Equal-i-Zer systems so they are almost an Equal-I-Zer in brand as well.
What is the difference between 2 point and 4 point sway control?
The original 4 point hitch has 4 friction points to reduce sway, 2 points at the trailer brackets and 2 points at the hitch head. The e2 only has 2 points of friction at the trailer brackets. The 4 point hitch will reduce sway better than the 2 point. Both will distribute the weight the same.
What is the difference between trunnion and round bar?
There are two types of spring bars, round and trunnion. The round style bars slide up into the head and are held in place with clips. The trunnion style bars slide into the head from the side or back.
What is a Hensley hitch?
The Hensley hitch is the only towing system on the market that guarantees the total elimination of trailer sway. And we’ve got 25 years of perfect performance to back up that claim. Our mission is the same today as it was then: to keep you and your family safe. Give us a call at 1-800-410-6580 today.
What is a trunnion style hitch?
CURT trunnion bar weight distribution hitches offer precise leveling of your towing setup. They are available in capacities from 5K to 15K and can be purchased as a kit with an included pre-torqued trailer ball and sway control unit.
Is fastway a good hitch?
5.0 out of 5 stars Very solid, well built. Extreme ride improvement! I purchased the (Fastway e2 2-Point Sway Control Round Bar Hitch, 94-00-1061, 10,000 Lbs Trailer Weight Rating, 1,000 Lbs Tongue Weight Rating, Weight Distribution Kit) primarily for my camper trailer.
Where are fastway hitches made?
Every Flash™ aluminum ball mount is proudly made in America.
Does a 3000 pound trailer need a weight distribution hitch?
If your vehicle weighs less than 6,000 lbs, a weight distribution system and trailer brakes should be used when towing a 3,000 lb trailer.
Do I really need a weight distribution hitch?
A Weight-Distributing Hitch Is Necessary For Safety
Simple, it improves safety. With the weight-distributing hitch properly set up, your load is evenly distributed over the axles on the trailer which gives you more stability and control. It also gives your tow vehicle and trailer a more level ride.
Do I need a load distributing hitch?
A weight distribution hitch is an essential piece of equipment when it comes to towing anything behind your vehicle. Towing a trailer, pop-up camper, or anything that is a considerable weight means you should have a weight distribution hitch installed.
