With a handheld broadcast spreader, Scotts recommends a setting of 4 when overseeding or seeding a new lawn but suggests that the sower make two perpendicular passes for new areas. For drop spreaders, use a setting of 8 1/2 for overseeding and a bare-lawn setting of 12 1/2.
What setting do you use on a broadcast spreader for grass seed?
For application with a handheld broadcast spreader, use a setting of 3 when overseeding and 4 when planting a bare lawn. For drop spreaders, go with a setting of 5 for overseeding and a bare-lawn setting of 6 3/4.
How do you determine spreader settings?
Calibrating Your Spreader
Divide 100 by the square foot the bag of fertilizer covers.Multiply the weight of the bag by this number.The answer is the amount of fertilizer needed to cover 100 sq. ft.Place this amount in the spreader.Mark off a 10 ft. x 10 ft. area.Apply using the suggested setting.
How do you use a Scotts broadcast spreader?
Treat the perimeter of your lawn first, then steadily cover all areas of your yard going back and forth in straight lines. Make sure your passes overlap the product for even coverage. Pour any unused material back into the bag and sweep up any product that strayed from your lawn.
What setting should I set the Edgeguard Mini for fertilizer?
When applying grass seed for a new lawn, or repairing bare spots, set the orange dial to 13. For overseeding applications, set the dial to 7 1/2. Using your Edgeguard Mini broadcast spreader correctly will ensure accurate, even coverage and reduce wasting costly seed.
How do you calibrate a Scotts broadcast spreader?
IT IS NECESSARY TO CALIBRATE YOUR SPREADER AFTER ASSEMBLING IT OR IT MAY SPREAD THE INCORRECT AMOUNT OF PRODUCT. Turn micrometer until 6 is centered in window. If the shutoff bar covers the calibration line, turn the adjustment screw counter-clockwise. If the bar is below the line, turn the adjustment screw clockwise.
What should I look for in a broadcast spreader?
Considerations in Spreader Selection
Overall size of the area to be seeded.Shape of the area, such as lines, corners or curves.Terrain of the seeding area.Degree of precision needed.Time concerns or constraints.Number of obstacles, such as trees and garden beds.
What setting should I use on my Scotts spreader for fertilizer?
After choosing the best broadcast spreader for your yard, locate the orange dial on the spreader and turn it to the setting indicated on the seed or fertilizer bag. Turn clockwise for a higher setting of 12 or 14, which is for larger granules or grass seed, or counterclockwise to reach a lower setting of three or five.
What setting should I use on Scotts Wizz spreader?
Spreader settings:
Scotts Green Max Lawn Food (Regular Rate) – 4 1/4. Scotts Turf Builder Grass Seed Sun & Shade Mix (Reseed) – 5 1/4. Scotts Turf Builder Grass Seed Tall Fescue Mix (Reseed) – 7 (For new lawns, go over twice)
What setting do I use for Step 1 spreader?
SPREADER SETTINGS:
Scotts Wizz Spreader – Set to 3.75.
Which is better drop or broadcast spreader?
A broadcast spreader will take extra care to make sure different parts of the lawn receive an even coverage. A drop spreader, as previously mentioned, is more precise because it doesn’t broadcast the granular product or seed and doesn’t change the amount spread based on a changing walking pace.
How do you use broadcast fertilizer spreader?
Place the spreader at one end of the area, 3 feet from the edge. The spreader throws the fertilizer out to the side, so don’t stand right on the edge. Squeeze or push the handle to begin dispensing it. Walk at a slow, steady pace, about 3 miles per hour to cover the entire perimeter of the area.
What is the spreader setting on fertilizer?
Place your spreader setting on a low setting (usually one-fourth of the spreader setting range or less). Spread the material over a 50 x 20-foot area (1,000 square feet). If there is material left over, increase your setting. If you come up short, decrease your setting.
How do I use Scotts Edgeguard mini?
Fill hopper with Scotts® lawn fertilizer or grass seed. Turn orange rate dial to the desired “Broadcast/Rotary Spreader” setting listed on the back of each Scotts® product. To apply product begin walking, then squeeze and hold trigger. NOTE: Each pass should be within 1.5 metres (5 ft.)
