For Jon boats between 8 foot and 16 foot, 8 hp – 20 hp motors will offer more than enough power to push the boat upstream, achieve a respectable speed and get the boat on plane. 18 + foot Jon boats can usually take a 20 – 25 hp outboard motor.
Can you put a motor on a jon boat?
Yes, a trolling motor is usually enough for powering a jon boat, but keep in mind that this requires using an adequately powered trolling motor for the size of your jon boat. If you choose an underpowered trolling motor (or run into strong headwinds), you may have problems moving the boat forward against the wind.
What is the biggest motor you can put on a 14Ft jon boat?
You don’t need anything larger than 25 hp.
How big of a motor can you put on a 14Ft boat?
How Big Of A Motor Can You Put On A 14Ft Boat? The motor for 12 ft – 10 ft is usually between 10 and 15 horsepower. This motor is 14 feet high by 15 feet wide and has 15 horsepower. You can power it from 15 to 20 HP motors from 16 feet.
What size motor is recommended for a 12 foot jon boat?
12-foot jon boats have an average weight capacity of 420 pounds and an average maximum horsepower of about 5 to 7 HP, however, some models allow up to 10 HP. A 5 HP motor is expected to have a top speed of 10mph. 7 HP could have 15mph or more. This speed is great when riding in slower moving rivers and streams.
Is a mud motor worth it?
The bottom line is that mud motors do give you more options for places to go and spots to hunt – but with more frequent maintenance and upkeep. Outboards are quieter, easier to operate, and horsepower to horsepower, less expensive.
How much horsepower does a 16 foot boat need?
To achieve maximum efficiency, you’ll have to give it 50 to 300 horsepower. There’s a range of the required power as you take into consideration the size and usage. An aluminum boat that is 16 feet long needs to have a 60 horsepower motor. Once equipped, it can have a speed of 25 to 30 miles per hour.
Is my outboard mounted too high?
Too high usually results in low water pressure, prop letting go in turns, or lack of bow lift are usually the telltale signs. Sometimes porpoising is caused by too much bow lift and dropping the motor will give it more bite and make it worse. That deep v isn’t going to run like a pad hull, carrying the nose high.
What is Max HP for 14ft jon boat?
The max rated horsepower for most 14′ boats is 15hp unless they are the wider ones.
How do you increase the weight capacity of a jon boat?
Ways to Add Buoyancy to a Jon Boat
Add flotation pods. Move some of the heavier items to the front. Add PVC tubes. Built-in air cavities for buoyancy. Adding buoyancy using foam.
What size outboard do I need for a 15 foot boat?
What Size Outboard Do I Need For A 15 Foot Boat? You should find one to match your budget for a boat that is about 10-15 feet long. These lightweight boats won’t be quite as powerful as larger cars so they’ll have an engine about 15 horsepower in the range of 20-30 horsepower.
How fast does a 10 hp motor go?
Note: Many factors can affect the real-world performance of the 10 HP outboard motor, including the boat type, load, weather, battery type and capacity. That’s to say, with one single charge, you can go over 40 miles at 5 mph speed.
Can you put a long shaft outboard on a jon boat?
A long shaft will definately work. Wawasee has a jon boat and motor that his grandfather give him that was a low transom boat and (Monarch mod vee??) and an old 20 hp Mercury. I rode in the boat a few times and it actually worked okay.
Is a 12 foot jon boat big enough?
As boat length increases the weight capacity similarly increase, so with a 12 foot boat approximately 400 lbs can be safely contained and at 14 foot 400+ lbs. At 16 foot in length a Jon boat can usually hold about 1,000 lbs. An 18 foot Jon boat will hold, on average, about 1,500 lbs.
How big of an electric motor do I need for my boat?
General rule of thumb: you need at least 2 lbs. of thrust for every 100 lbs. of fully-loaded boat weight (people and gear included). If things like wind or current are major factors where you fish, you’ll want a little extra thrust.
What size motor can I put on my boat?
The rule of thumb is based on weight alone, and says you should have between 40 and 25 pounds of weight for each horsepower. For example, a 5,000-pound boat could have an engine with between 125 and 200 horsepower.
