Bargeboards refer to the fascias located at the gable end or side of a roof. Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property.
What is a barge in framing?
A barge board is the wooden board found on a home that runs up the A frame of a gable. Another way to think of it is a more vertical fascia board. If you’re familiar with fascia boards, you know that they run along the eave where the gutter would mount.
What is the difference between a barge board and a fascia board?
Barge boards and fascia boards are very nearly the same thing. They are both long, straight boards that run along the lower edge of the roof. However, fascia boards run horizontally, carry the gutters and support the bottom row of roof tiles. Barge boards run diagonally and are located at the gable end of a property.
What is a valley rafter?
Definition of valley rafter
: the rafter running from the wall plate to the ridge and along the valley of a valley roof.
What is the barge of a house?
A Bargeboard are also known as verge boards. They are the board that is fastened to the projecting gables of a roof. These provide strength to the roof and protect the otherwise exposed ends of timbers which are attached to the roof.
What is barge wood?
Barge board is a softwood, usually poplar or pine, about 2” thick and anywhere from 1′-0” to 2′-0” wide and can be over 20′-0” long. There are holes throughout boards to allow room for the rope that lashed them together. For single story construction, the boards are stacked vertically on a sill.
Why is it called barge board?
Bargeboard (probably from Medieval Latin bargus, or barcus, a scaffold, and not from the now obsolete synonym “vergeboard”) or rake fascia is a board fastened to each projecting gable of a roof to give it strength and protection, and to conceal the otherwise exposed end grain of the horizontal timbers or purlins of the
What is rafter tails on a roof?
Rafter tails are the exposed exterior portion of a building’s wood structural truss that projects beyond the perimeter wall of the structure. This structural element is secured to the top of the wall or tie beam and then projects to support the soffit overhang.
What is a gable rafter?
A gable roof is a roof consisting of two sections whose upper horizontal edges meet to form its ridge. The most common roof shape in cold or temperate climates, it is constructed of rafters, roof trusses or purlins.
What is hip jack rafters?
HIP JACK RAFTER: A rafter that runs from the top of the wall plate to a hip rafter at 90° to the wall plate (see Figures 1, 8 and 14). CRIPPLE JACK RAFTER: A rafter that runs from a hip rafter to a valley rafter, perpendicular to the roof ridge (see Figures 1 and 8).
What are fly rafters?
A fly rafter is attached to the overhang of your roof. It extends beyond the end of the rafter, if necessary. Fly rafters help keep the plywood or other type of roof sheathing straight. The size of a fly rafter can vary depending on personal preference, but should be slightly smaller then the regular roof rafters.
What is a fascia board?
It may not look like much, but a fascia board is an essential component of your home’s plumbing and gutter system. A fascia board is a thin longboard that runs along the lower outer edge of your roof and covers the entire roofline.
What wood is used for barge boards?
The most popular wood species for fascia, soffits and barge boards are; Western red cedar, European oak, Douglas fir and Larch. Accoya fascia board is a highly recommended sustainable option that is extremely durable. Utile or Iroko fascia, barge and soffit boards are also very good options.
What is board under soffit called?
Frieze boards are horizontal trim members you see at the top of your siding right where it meets the eave or soffit line. Frieze boards sit flush against your wall but jut out enough for your siding to tuck under.
