Rinse the exterior with a fresh damp cloth and then wipe it dry. Pull any hair or other debris from the hands-free cleaning brush if necessary and then wipe the hands-free cleaning brush window and brush with a damp cloth if wet or dirty. Reassemble your SpotBot deep cleaner.
How do spot bots work?
Plug the SpotBot into the wall socket and place the unit over the stain. The clean water tank should already be filled. Press the desired setting button and watch the unit through the cleaning stages by observing the indicator lights on the top of the SpotBot.
How do you use a pet Spot Bot?
Remove the Tough Stain Brush from the back of the unit, then attach it onto the grip of the hose. Press the spray trigger button to spray the soiled area, then slowly move tool back and forth over the area. Release the trigger to suck up the dirty solution. Work in small sections until the area is clean.
Can you use Bissell spot cleaner on carpet?
Be prepared for unexpected messes with the convenience of the BISSELL SpotClean. Quickly removes most spots and stains from fibres in carpets, rugs, upholstery, and cars.
Why is my Bissell SpotBot leaking?
It is most likely either the seal under the dirty water tank or the cap on the clean water tank. Both parts are available from Bissell and I would buy and replace both of them at once to save on shipping. In my case it was the clean water tank that began leaking after about 10 years.
What can I put in my Bissell SpotBot?
You can try using 1 cup of white vinegar and fill the rest of the Bissell Spot Cleaner tank with hot tap water. Just be sure to follow normal safety guidelines that go with using vinegar as a cleaner.
How do you fill a Bissell SpotBot?
Follow the fill lines on your Clean Tank and add the correct amount of hot tap water, BISSELL Portable Machine formula, and 1 oz of BISSELL Boost if desired. If you use BISSELL Oxy Boost it will continue to work on the stain for six to eight hours. Tighten black cap on bottom of clean tank and replace.
What is the difference between the BISSELL Spot cleaners?
What is the difference between the Bissell Spot cleaners? The small difference between them is the color and included tools. SpotClean ProHeat 2694 comes with a trial-size Professional Spot & Stain + Oxy formula, a 3-inch Tough Stain Tool, a Deep Stain Tool, and a HydroRinse Self-Cleaning Hose Tool.
Do you use hot water in BISSELL Spot Cleaner?
Fill up with warm water.
That’s why we recommend filling up your carpet cleaner’s tank with warm water. Some BISSELL Carpet Cleaners also use HeatWave technology to keep the water hot throughout the cleaning process.
How do I shampoo my carpet with BISSELL?
How to Shampoo Your Carpet
Step 1: Remove Debris with Vacuum. Step 2: Pretreat to Loosen Stains. Step 3: Setup Your Carpet Cleaner. Step 4: Clean Your Carpets. Step 5: Rinse Your Carpets (Optional)
How do you clean the hose on a Bissell Little Green?
First attach the HydroRinse to the cleaning hose. You should hear a click once it snaps into place. Now turn on the machine with the hose and attachment in an upright position. Hold down the trigger to rinse the hose for 30 seconds.
