Downstream Injector

Downstream Injector

A downstream injector is a device used to inject chemicals or detergent into the flow of water after the pump on your pressure washer. This differs from an upstream injector which injects chemical before the pump.

How far will a downstream injector pull?

So typically downstream injectors will work up to about one hundred and fifty feet of pressure hose before they stop drawing chemical.

What is downstream in pressure washing?

Downstream injection introduces the chemicals after the pump, and upstream injection puts the chemicals in before the pump. Be careful about which types of chemicals you’re putting in when using upstream injection.

How do you mix downstream injector bleach?

In a 5 gallon bucket mix a solution of 2.5 gallons of 12% Sodium Hypochlorite (bleach) and 2.5 gallons of water. Add 64 ounces of SoftWash Systems Green Wash and stir well. Once in solution place your chemical injection hose into the 5 gallon bucket.

How much does a downstream injector dilute?

Downstream injection is a means of applying chemicals with the use of a pressure washer. It is an effective way of applying chemicals, as long as the end solution of the chemical being applied will be effective at dilution rates of 8-1 and higher.

Can I run sh through my pressure washer?

You’re good to go. Just use your DS chemical injector line that’s laying on the floor and you’re fine.

How does pressure washer soap injector work?

When a chemical or soap nozzle is used, and the pressure is reduced below this point, the ball can lift from the seat inside the injector, and allow chemical to flow. The lower the pressure, the easier it is for the chemical to enter the water stream.

Can I run bleach through my pressure washer?

Never Use Bleach with Pressure Washers

But, when you see mold or mildew growing on your siding or walkway, don’t even consider running bleach through your power washer. Bleach will corrode your pump’s seals and essentially render the pressure washer useless.

What is a XJET?

The X-Jet is a nozzle that connects to a pressure washing gun and lets you shoot a variety of chemical mixes, including bleach, up to 40 feet safely from the ground. It’s a great option for soft washing because you can use it with your existing power washing equipment.

How do you mix sodium hypochlorite for pressure washing?

That’s 3 parts water, 1 part bleach.

Alexander Ross
Author

Alexander Ross

Alexander Ross has covered the video game industry for a decade, writing deep dives on game design, esports tournaments, VR developments, and gaming culture.