Stihl recommends that its MS 170, MS 171, MS 180, MS 181, MS 192 and MS 211 homeowner models be equipped with guide bars between 12 and 16 inches.
Can you put an 18 inch bar on a Stihl MS170?
Can you put an 18 inch bar on a Stihl MS170″? The short answer is that you cannot put an 18-inch bar on this chainsaw. This is because there are certain specifications regarding the guide bars that come with the chainsaw, and if you go beyond them, you may end up damaging your chainsaw.
What’s the smallest STIHL chainsaw?
Light, agile and powerful from the start – the new STIHL MS 201 C-M for all professional foresters. With its compact construction, extremely low weight and optimal handling, STIHL’s lightest professional chain saw demonstrates an impressive array of strengths, particularly when harvesting thin wood and trimming.
What Oregon bar fits Stihl MS170?
Our records indicate that the Oregon 105668 bar/chain combo is the correct part number for your Stihl MS170 with a 3/8″ LP drive sprocket.
How do you know when you need a new bar on your chainsaw?
How to Recognize a Worn Chainsaw Bar. As a chainsaw bar wears out, you lose cutting accuracy and cuts take longer. If the same type of cuts that your saw used to breeze through now take twice as long—even with a sharp chain—you might look at how worn your bar has become.
How do you start a STIHL m170?
Instructions for Stihl MS170 Chainsaw
Remove the scabbard. Fill the gas tank with a mixture of 50:1 ratio of gasoline and Stihl oil. Lock the chain by pushing the front hand guard forward. Press the decompression valve button. Press the down trigger interlock while simultaneously squeezing the throttle trigger.
Where is the Stihl MS 170 made?
Quality STIHL production: All of our saw chains are manufactured with Swiss precision in our STIHL factory in Wil, Switzerland.
How do you tighten the chain on a Stihl MS170?
Lift the guide bar. Use the screwdriver end of your adjustment tool to tighten the tension screw by turning it clockwise. The screw is located on the outside of the guide bar slightly below and just ahead of the sprocket cover nuts. Tension the chain until it rests securely against the underside of the guide bar.
What’s the difference between Stihl 170 and 171?
The MS 170 has a displacement of 1.80 cu. in., fuel capacity of 8.5 oz., chain oil capacity of 4.9 oz., and powerhead weight of 8.6 lbs. The MS 171 has a displacement of 1.94 cu. in., fuel capacity of 9.5 oz., chain oil capacity of 6.1 oz., and powerhead weight of 9.5 lbs.
