How to fix it
Check the water supply system in the house and the washer. Open the stop valve completely.Remove the fill hose and check, if it is not clogged. Run some water through the hose to clean it. The streamline filter may be clogged. It is located on the junction between the washing machine and the fill hose.
How do I fix error code 1e?
Samsung washing machine IE error – Possible solutions
Do a hard power reset. You need to unplug your Samsung washing machine for about 5 minutes as this will normally reset most of the electronic glitches or any other issues with software that may be present. Ensure proper wire connection. Replace the pressure switch.
What is IE code in LG washing machine?
An IE error code in LG washing machines signals that the machine’s washer was not filled with water in the allotted time. This could also be possible due to a faulty water inlet valve or a problem with a drain hose among others.
What is 1E in washing machine?
The 1E error code occurs when there is a water level sensor failure which could be a result of a mechanical problem. This includes the water valve getting stuck in the open position, or any kind of electrical malfunction.
How do I fix E1 error on washing machine?
E1 – water inlet alarm
Check that the water faucets are not closed.Check that the water pressure in the house is over 20 kPa.Clean the inlet hose filter screens. Be careful not to remove or disturb the screen placement.Check that the drain hose is not below 27½” (700 mm) from the floor.
What does IE error mean on LG dishwasher?
LG Dishwasher 1E error code is programmed to indicate that the drain pump is running, and it is not receiving the back pressure that is needed. This also indicates that there is water leakage in the draining system.
Why does my washing machine keep saying E1?
When the Washing Machine is displaying E1 in the panel, it is indicating an error in the water supply. The appliance is not detecting that the unit is filling with water. If problem persists, contact our Samsung Call Centre for further assistance.
Why does my Samsung washer say IE?
Samsung malfunction 1E or 1C
Is there an error message 1E or 1C on the display of your Samsung washing machine? If so, there is a problem with the water level sensor. This means that the water pressure or water level is not correct. First check whether the washing machine is properly connected to the water supply.
How do I reset my washing machine?
To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.
