7-3/4 in x 2 in Edger Blade | CRAFTSMAN.

When should I replace my edger blade?

A: Edger blades vary in length from 8 to 10 inches when new, so you should be able to go through a season without replacing the blade. However, if you are using your edger more frequently, performance will start to deteriorate after the blade reaches half its original size.

Do you sharpen edger blades?

No they don’t need sharpening. All edger blades are like these. They have sguared edges. They are just pressed metal blanks.

How do you change the blade on a Craftsman edger?

Hold the crescent wrench in place with one hand, and place the box wrench onto the lock nut in a vertical position. Turn the wrench counter-clockwise until it begins to loosen. Continue loosening the lock nut until you can remove from the drive shaft. Slide the new blade onto the drive shaft.

How do I change the blade on my edging?

Easy Tricks to Change the Blade on Your Edger
Make sure you lubricate it first.Use a screwdriver/pin or similar to lock it in place.Make sure the new blade is lined up properly.Pull your pin/lock out, and reinsert the key.

How do you maintain an edger?

Lawn Edger Engine Maintenance Tips
A First Glance. Before starting the engine, check the belts to be sure they’re not frayed or cracked. Inspect Oil. An engine should never be started without first checking the oil. Air Care. Clean It Up.