Tek screws, also called self-drilling screws, are self-tapping fasteners that have a drill bit end allowing them to be used for screwing materials such as wood and metal together without pre-drilling.

Why is it called a tek screw?

Tek is to self-drilling screws as Kleenex is to nose tissue – a brand name. As the first of its kind, “tek” became synonymous with the self-drilling screw design, and now tek screws are essential for a range of applications today.

Are Tek screws for metal?

Wing Tip Tek Screws

Scrooz Wing Tip screws are professional grade high performance self drilling fasteners for fixing timber to metal in a single operation without the need for pre-drilling.

What is a Tex screw?

Tek screws, also known as self drilling screws, make it easier to complete projects because they don’t need a pilot hole, meaning they pre drill and fasten in one motion. Heavy duty self drilling screws are suitable for use with a drill or for use by hand, they come in a variety of lengths, widths and finishes.

What does a tek screw look like?

Tek® screws — also called self-tapping fasteners or self-drilling screws — are screws that have a very small carving at the end of their tip, called a drill bit. The drill bit tip creates a small hole by tapping before driving it in.

How do you measure a tek screw?

The simplest way to remember how to measure length: Length is the distance from the flat part of the head, to the tip or blunt end of the screw or bolt. Almost all screw head types will either be flat on the top or on the bottom.

Can you reuse Tek screws?

Understanding types and materials of which they are applied is vital – for example if you are using self-tapping screws for aluminium, they don’t need pre-drilling and are easily removed without any damage caused to the metal. And, actually, they can be reused in the same material.

Do you need to pre drill Tek screws?

Each Tek screw features a carving piece on its tip, which is what makes self-drilling possible. This means you don’t need to create a pilot hole before the fastener, and it also means your work moves forward efficiently. Plus, Tek screws are versatile.

Can I use metal Tek screws in wood?

Self-drilling screws are sometimes known by the brand name, Tek® Screws. These screws can be identified by the drill bit shaped point of the screw and are designed for a variety of applications such as fastening metal to metal and metal to wood.

Will self tapping screws go through Aluminium?

Self-tapping screws are good for use with metals, various types of plastics (plywood, fiberglass, polycarbonates), and cast or forged material, like iron, aluminum, brass or bronze. Self-tapping screws also work for surfaces where you can’t secure the rear end with a nut.

Can you use Tek screws in timber?

A tek screw has a drill point and the tip of the screw giving the ability to drill its own hole. Using the correct tek screw for your application will eliminate the need for pre-drilling. The Fastener Factory carries a wide range of tek screws for Steel and Timber.

What screws to use on colorbond?

12 x 50 T17. Roofing Screws – Available in Colorbond® Steel colours or plain with neo washers to provide a watertight seal. These screws are the most common screws used to fasten down corrugated sheeting. They are used for soft timber battens or hardwood and can also be used for metal battens up to 0.55mm thick.

How strong is a tek screw?

Larger Tek screws (No. 3 Tek and above) are strong enough to penetrate 12~20-gauge galvanized steel, as well as 3/8” to ½” (10~12.5 mm) structural steel and can be used on various civil and naval engineering applications.

How much weight does a tek screw hold?

Typically, a self-tapping screw can sustain around 80 to 100 pounds of weight.

What are Tek 5 screws?

Hex washer head tek 5 screws are zinc plated self-drilling sheet metal screws with an extra long drill point tip and are threaded from the top of the tip to the bottom of the hex head. Hex teks 5 have a longer drill tip than regular hex teks.

Do Tek screws rust?

Tek screws are made from high-grade, anti-corrosive material that can withstand rust and corrosion.

What are Tek screws coated with?

– Zinc plated finish protects the job’s appearance.