10 inch spray pattern ideal for larger surfaces such as houses/buildings, walls and ceilings. The . 015 inch hole size is best choice for spraying interior/exterior paints, primers and enamels.

What is a 311 spray tip used for?

6 inch spray pattern ideal for narrow surfaces such as fences, decks and furniture. The . 011 inch hole size optimal for spraying thinner materials like semi transparent stains, water sealers, stains or polyurethanes.

What is a 517 spray tip used for?

OVERVIEW. The reversible RAC IV SwitchTips are the most widely used tip for spraying a variety of coatings from lacquers to exterior paints. Use the Reverse-A-Clean (RAC) feature to quickly clear tip clogs by simply twisting the tip and spraying in the reverse position.

What is a 211 spray tip used for?

The 211 spray tip is used to work with light lacquers and spray more accurately. For example, to paint beams and window frames. To paint larger surfaces, such as ceilings or tables, it would be more appropriate to use a 411 spray tip with lacquers or paints / interior materials.

What is a 210 spray tip used for?

Fine finish spray tips are used for cabinetry, furniture and interior trim work (for a smooth fine finish) example Graco FF LP spray tips: 210 or 310. Low pressure tips are used primarily for spraying with pressures between 55 to 76 bar (800 to 1100 psi).

What is a 413 spray tip used for?

The Reverse-A-Clean (RAC) 413 RAC IV SwitchTip is designed for narrow surfaces and thinner materials like stains and polyurethanes. The 413 SwitchTip has a 0.013 inch orifice and produces an 8 to 10 inch fan. Reverse the SwitchTip to easily clear clogs. Questions About this Product?

What is a 213 spray tip used for?

The 213 SwitchTip has a 0.013 inch orifice and produces a 4 to 6 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.

What tip to use for spraying doors?

The best tip to use for spraying interior doors with an airless sprayer is a 310, or a 312 tip. These tips produce a 6-inch spray fan to coat doors quickly with less overlapping than using a smaller tip.

How do I get a smooth finish with a paint sprayer?

Just wait till the paint is dry and lightly sand it with a fine grit sanding block to smooth it over. Paint over it again and you should be good to go!

What is a 513 spray tip used for?

The Reverse-A-Clean (RAC) 513 RAC IV SwitchTip is designed for narrow surfaces and thinner materials like stains and polyurethanes. The 513 SwitchTip has a 0.013 inch orifice and produces a 10 to 12 inch fan. Reverse the SwitchTip to easily clear clogs. Questions About this Product?

What is a 619 spray tip used for?

619 – RAC IV Spray Tip

RAC IV Tips are most commonly used with Graco Magnum and Homeowner airless paint sprayers, but are able to be used interchangeably with Graco RAC V tips and guards. 619 Tips are most commonly used with: Latex. Oil Based Primers.

What is a 411 spray tip good for?

011 inch hole size optimal for spraying thinner materials like semi transparent stains, water sealers, stains or polyurethanes. Less overspray shortens cleanup time with less wasted material.

What is a 215 spray tip used for?

The 215 SwitchTip has a 0.015 inch orifice and produces a 4 to 6 inch fan. Reverse the SwitchTip to easily clear clogs. Used for residential, commerical or industrial applicaitions. Best used with materials ranging from lacquers, latex paints and mastics.

What do airless spray tip numbers mean?

The bigger the number, the bigger the hole for the paint to flow through. Using the examples from earlier, a 211 has a 0.011 inch orifice, while the 521 has a 0.021 orifice.

What size tip should I use to spray primer?

First, examine the coating that will be sprayed. Put simply, heavier coatings will require a larger orifice size than lighter ones. For example, primers are usually thicker than the accompanying paint so you should use a 1.7 or 1.8 mm tip to prime most surfaces.

How long does a Graco spray tip last?

A Little About Spray Tip Wear

Graco tips should last anywhere from 15-135 gallons when spraying latex. They may last longer with oils and stains and may last up to a few hundred gallons if spraying a thin water like material with no grit.

Why is my spray tip spitting?

A loose fluid nozzle does not properly seat in the tip of the spray gun and causes air to enter the fluid supply resulting in spitting.