Check the Spark Igniter
If gas is coming out of the pilot but it still won’t light, the spark igniter could be the problem. You should clear out any debris between the igniter and thermocouple. Blowing compressed air into the pilot area, waiting a couple minutes, then trying again could help to fix the problem.
Should the pilot light always be on in a gas fireplace?
We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace’s pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.
Can you manually light a gas fireplace with electronic ignition?
Re-lighting pilot lights is straightforward on today’s modern gas fireplaces. If you have an electronic ignition unit, using your remote control simply press the ‘on’ button and the pilot will re-ignite within a few seconds, followed by the fireplace a few seconds after that.
Should I turn off the pilot light on my gas fireplace in the summer?
Your Utility Bill
Perhaps the most important reason to turn off gas fireplace pilot light in summer is because of the money and energy you will be saving. If you leave the pilot light on during the summer it is simply sitting there burning gas, which is wasting gas and contributing to an exorbitant energy bill.
How do you start a gas fireplace with a light switch?
Fireplaces With Control Panels
Your first step is to turn the knob from “off” to “pilot” and then push it in; this manually sends gas into the system. Next, push the igniter button until it lights; you should push once a second. Ignition may take several pushes, especially if it’s been a while since it was last lit.
Where is the pilot light on a gas fireplace?
Locate the gas control knob, which should have settings for “Pilot,” “On,” and “Off.” Look around for a red or black button; this is the piezoelectric spark igniter. Press the button a few times to verify that there it creates a spark at the end of the pilot tube. This spark will ignite the pilot flame.
How do you light a fireplace?
So lets start the fire!
Ensure that all air vents in the fireplace are open. Put the logs on the bottom of the fireplace. Add a layer of small logs of about 4 cm, and then one or two layers of kindling. Remember that air is important – approx. Put a couple of firelighters on top of the layer of kindling wood. Light it!
How do you bleed air from a gas fireplace?
While pressing the valve control knob in, press the igniter button repeatedly until the pilot ignites. This could take anywhere from one to 10 minutes to bleed air out of the lines as the gas starts to flow. Once the pilot is lit, continue to press the valve knob inward for 30 seconds before releasing it.
Will gas leak if pilot light is off?
Although this is an area of concern for many people, the reality is that boilers are built so that the gas supply to the pilot light is shut off if the flame goes out. Whilst the cause of pilot light failure needs to be investigated, extinguished pilot lights aren’t going to cause a gas leak.
What if pilot light goes out on gas fireplace?
If the pilot light of an appliance goes out, turn off the gas at the appliance for several minutes before attempting to re-light it. Instructions should be attached to the appliance.
Is there always a flame on a gas fireplace?
Do Gas Fireplaces Always Have A Flame? Gas fireplaces that use a standing pilot ignition system will have a pilot flame that’s always on. Gas fireplaces that use an intermittent pilot ignition system won’t have and/or require a flame that’s always on as the pilot can be switched on and off as required.
Can I turn on my gas fireplace without power?
Many gas fireplaces will work without electricity. You can run both intermittent pilot ignition fireplaces and standing pilot light systems during a power outage. IPI valve systems will normally have a backup battery system in place to ignite the flames.
How do you start a gas fireplace manually?
Light A Gas Fireplace With A Control Panel
Step 1: Read Manual. Step 2: Open Access Panel. Step 3: Turn Control Gas Valve Knob to “OFF” Step 4: Wait 5 Minutes. Step 5: Set Gas Valve Control Knob To The Pilot position. Step 6: Hold Gas Valve Control Knob and Click Ignition Switch.
How much does it cost to keep the pilot light on a gas fireplace?
A pilot light is a small flame that is kept lit to provide a catalyst for the main burner to be turned on when needed. The average fuel consumption of your standing Pilot light is: Natural gas is $0.60 a day = $219 a year. Liquid Propane is $1.80 a day = $657 a year.
Do gas fireplaces burn a lot of gas?
Along with overall energy efficiency, it is important to consider exactly how much a gas fireplace burns per hour. Based on the currently available models, gas log sets burn anywhere from 60,000 – 90,000 BTUs of gas per hour. On the other hand, the more efficient gas fireplaces use 10,000 – 70,000 BTUs/hour.
Is it bad to turn off gas fireplace?
Perks of Turning Off Your Gas Fireplace
You can get savings and conserve energy if you turn off your pilot light. A white sulfur-based film can develop on the inner glass if the pilot light is kept on for a while without turning on the main burner. This byproduct can build up over time.
