Trex and TimberTech Composite Decking Warranties
Composite decks have a lifespan of at least 25 to 30 years — and they have warranties to match.
Is Trex decking cheaper than wood right now?
ft. Trex deck can cost as low as $1,600 for an, economic project, or as high as $10,600+ for a high end project with many add-ons. Trex decking is considerably cheaper compared to other top composite decking brands, such as Gorilla, Fiberon and AZEK but is more costly than other decking material options such as wood.
What is the least expensive Trex decking?
Trex decking costs range from $5 to $12 per square foot, compared to $3 to $7 or more per square foot for commonly used wood planks. Pressure treated wood might cost another $1 to $3 per square foot.
Is there a cheaper version of Trex?
Generally speaking, Trex and Fiberon offer the least expensive options while TimberTech and AZEK come in on the higher end. However, keep in mind that the higher-tiered grades of Trex are more expensive than the lower-tiered grades of Timbertech so it’s important to make sure you’re comparing apples to apples.
Is Trex hot on your feet?
While wood gets hot enough to make walking with bare feet uncomfortable, composite decking gets even hotter. In some cases, Trex can become so hot that it may become unusable under intense, direct sunlight.
What are the three grades of Trex decking?
Trex deck design comes in three types: Select, Enhance, and Transcend. You can’t go wrong with any type of decking from Trex, but we’ve created a chart to help you decide which type is best for your needs. Trex has a variety of deck colors.
Is Trex decking slippery when wet?
Trex decking is a low-maintenance decking solution that requires a fraction of the work of wood decks and is less likely to get slippery when wet. It still requires occasional attention to keep it looking its best, but you’ll be delighted with the finished results.
Can I put Grill on Trex deck?
Yes, Gas grills are safe to use on a composite deck. Composite decking is designed to a minimum of Class C fire rating similar to wood decking. Gas grills can be safely used on both composite and wood decking being raised high enough to provide enough clearance as not to damage either composite or wood decking.
Can you power wash Trex decking?
Trex does not recommend the use of a pressure washer. The use of a pressure washer on deck surface could damage the decking surface and will void the warranty with respect to any condition caused by the pressure washing.
Is Trex decking worth the money?
Yes, worth it!
Yes, composite materials on decking and trim are worth the money. The labor to install composite is the same as the labor to install wood, which will rot and require a lot of maintenance. For example, the labor to replace a deck with Trex or wood might both be $4000.
What are the disadvantages of composite decking?
Cons of Composite Decking
A pricey alternative to wood. Durability comes at a cost, as composite decking is more expensive than wood. Composites aren’t natural. Composite decks aren’t completely maintenance free. You’ll need to comparison shop.
How much does a 14×20 deck cost?
The average homeowner spends $2,200 to build a 10×10 foot deck, $6,160 to build a 14×20 deck, and $8,800 to build a 20×20 deck. The cost to build a deck with pressure-treated wood, hardwood, or composite is about $25 per square foot, for both materials and installation.
What is the difference between Trex Transcend and select?
The surface of Trex’s Select line has a different look than Enhance or Transcend. Instead of the wood-streaking look, Select features a textured wood-grain look on the surface of the board, without the deeper grooves of Enhance or Transcend.
Is Trex Transcend worth the extra money?
Transcend is best suited for consumers that want a wide range of colors from an eco-friendly product. It’s a bit more expensive than the company’s other styles, but has excellent scratch resistance and is the only series with porch boards as well.
How do you attach Trex decking?
6 Steps For Decking Installation
Protect your substructure. Trex can be installed over timber, steel or aluminum substructures with joist centers at a maximum of 400mm apart. Cut your boards. Choose your layout. Hide your screws. Tighten as you go. Cover the decking edges.
