HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates. Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.

How long does it take for HYDRO BAN to dry?

Let topcoat dry to the touch, approximately 1–2 hours at 70°F (21°C) and 50% RH. When last coat has dried to the touch, inspect final surface for pinholes, voids, thin spots or other defects. HYDRO BAN will dry to an olive green color when it’s dry to touch.

Can HYDRO BAN be used over Kerdi?

So technically, they support the waterproofing bond you’ll get when applying Hydroban over Kerdi fleece. If the installation will support it (and if you’ll already have it on hand), you could also use anti-fracture fabric instead of Kerdi.

Is HYDRO BAN a vapor barrier?

HYDRO BAN Sheet Membrane is a vapor retarder and is ideal for use as the waterproofing and vapor barrier in steam room/steam shower applications.

Is HYDRO BAN paintable?

ByBrittney. A paint brush, paint roller (heavy napped roller), or a 5 mm x 4 mm V-notch trowel are all suitable for applying Hydroban.

Can you use HYDRO BAN outside?

LATICRETE Hydro Ban is a single component self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. LATICRETE Hydro Ban bonds directly to a wide variety of substrates. Interior and exterior. Swimming pools, fountains and water features.

How long does concrete need to cure before waterproofing?

Concrete continues to cure long after the concrete is poured. This curing process will expel water vapour and air for days after the concrete appears to be set. Sydney waterproofing companies will generally advise a waiting period of at least 7 days from pouring before a waterproof coating is applied.

How long can Redgard be exposed?

Do not apply to surfaces that may go below 40° F (4° C) during the first 72 hours after application, over wet surfaces or surfaces subject to hydrostatic pressure.

Can Redgard over Kerdi?

Can you Redgard over Kerdi? No, it won’t interfere with the performance or adversely effect it. RedGuard is not harder to adhere to. There is no reason to use both products although it can be easier to use the RedGuard in corners and niches without the build up you can get with kerdi.

Can you use HYDRO BAN on drywall?

A single 30-pound (13.6 kilogram) bag of Hydro Ban Cementitious Waterproofing Membrane covers 120 square feet at a maximum of 0.004 inch (1 millimeter) thickness when applied using two coats by brush, roller or spray application over interior and exterior concrete and masonry finishes, and over existing tile, drywall,

What is the difference between HYDRO BAN and hydro barrier?

The key difference is Hydro Barrier requires fabric to be used in all the corners and seams while Hydro Ban does not. There is also a color difference – Hydro Ban is sage color and will dry to an olive green color while Hydro Barrier is a light blue and will dry to a dark blue color.

Can you paint over hydro seal?

Limitations. This material should not be applied at temperatures below 50 degrees. Do not apply if there is a threat of rain within three hours of application. Hydro-Seal 75 should not be applied over other paints or coatings.

Can you paint over RedGard?

You can paint over RedGard, but it will void the warranty that comes with the RedGard product. The warranty is in place to show that the manufacturer is confident that this product is going to remain waterproof for the duration of its time on your wall or floor.