Resetting your Combination Lock
Open the lock using the previous combination. Insert the reset tool in the hole on the side of the lock. Push the reset tool in and turn 90° in either direction. Set wheels to your new combination.Turn and remove the reset tool. Record your combination in a safe place.
How do I force a Master Lock to open?
Turns out, any Master Lock can easily be broken into with just a small hammer. As this video illustrates, all you need to do is tap the side of a Master Lock with a hammer to get it to open, no key, no combination required.
How do you open a 3 digit combination lock if you forgot the code?
Standard Instructions for Opening a Combination Lock
Turn right three times. Stop at First Digit.Turn left one full turn passing 1st number and stop at Second Digit.Turn right and stop at Third Digit. Pull shackle. Profit.
How do you open a 4 digit combination lock if you forgot the code?
In order to reset a master combination lock 4 digit code, you will need a reset tool. Most combination locks will come with their reset tools, but bike locks may not. If you do not own a reset tool yet, get the item from the lock manufacturer.
How do you break a Master Lock without a bolt cutter?
By far the easiest way to cut a padlock is with bolt cutters.
How to Cut a Padlock Without Bolt Cutters (9 Quick & Easy Methods
Use an Angle Grinder. Use a Dremel. Use a Propane Torch and Hacksaw. Use a Cutting Torch. Use a Hammer. Use a Shim. Lock Picking.
How do you break a Master Lock with a screwdriver?
Jiggle the screwdriver while thrusting it in and out of the lock. Slide the blade of the screwdriver back and forth slowly. At the same time, work the handle of the around at different angles to engage as many pins as possible.
How do you break a 4 digit Master Lock?
How to Open a 4 Number Combination Lock
Look for your combination number. Set the first digit of the combination. Set the second digit of the combination. Set the third digit of the combination. Set the fourth digit of the combination. Pull the shackle to unlock.
How do you open a commercial Master Lock without a key?
1. Break the padlock with bolt cutters
Step 1: Choose a suitable pair of bolt cutters. Step 2: Fix the lock with pliers or a vise. Step 3: Apply indirect force on the cutters. Step 1: Check the direction of the lock. Step 2: Smooth the side where the shackle will fall off. Step 3: Open the padlock.
