Unlike traditional commodity OSB products that can swell or delaminate, AdvanTech subflooring is engineered with a unique resin formula and process. This allows AdvanTech subflooring panels to not only stand up to snow, ice and rain without flaking or swelling, but to also maintain its strength and stiffness.
Is AdvanTech better than OSB?
AdvanTech is specially engineered so that the layers create a “woven matrix of fibers.” This process makes the product stable throughout, which means it is less prone to squeaking. And its dense composition means nails/fasteners hold better than they do with plywood or OSB.
How thick is AdvanTech flooring?
AdvanTech sheathing panels are offered in three thicknesses (1/2″, 5/8″, 23/32″) for a wide range of conditions. All panels are available in nominal 4 by 8 foot sheets†† with square edge profiles, and a tongue and groove edge profile is also available in the 5/8″ thickness.
Should AdvanTech subfloor be nailed or screwed?
Any code approved subfloor fastener can be used to attach the AdvanTech subflooring to framing. Nails, screws and hybrid fasteners can be used with AdvanTech subflooring. Hybrid fasteners do no eliminate the recommendation to use subfloor adhesive.
How long does AdvanTech last?
AdvanTech subflooring is an industry leader in strength and stiffness, and has a 500 Day No-Sanding Guarantee[1]. The high density engineered wood panels have advanced moisture–fighting resin technology that not only helps prevent swelling or delamination, but also contributes to strong fastener-holding power.
Is AdvanTech plywood waterproof?
AdvanTech can sit in the rain for months and not swell at all. This product is truly a ground breaking product for the building industry.
What thickness subfloor is recommended?
The minimum thickness of plywood for subflooring is about 5/8 inch. Since it does not hold fasteners as well as plywood, OSB must be a little thicker, or at least 23/32 inch. There are several factors that determine what subfloor thickness is optimal for added benefits like insulation.
What’s the best subfloor material?
Plywood has been a standard subfloor material since the 1950s and remains the preferred subflooring for many builders. Standard plywood can be used for subfloors, but a better material is 3/4-inch tongue-and-groove plywood subflooring.
Is AdvanTech fire resistant?
AdvanTech flooring and sheathing panels are recognized as having a Class C (III) flame spread rating without need for test or label by HUD/ FHA Manual of Acceptance Practices, Section 405-8 to the Minimum Property Standards.
Can you paint AdvanTech flooring?
Apply your oil based primer/paint, polyurethane or epoxy coating directly to the AdvanTech following the manufacturer’s recommendations for application. Be careful in choosing a coating for the AdvanTech because it may interfere with finish floor covering installation and performance.
Can you lay tile over AdvanTech?
Note: Do not install ceramic tile directly to AdvanTech subfloor panels. An approved underlayment must be installed over AdvanTech subfloor panels prior to ceramic tile installation.
What is the best construction adhesive for subfloor?
If you are looking for a subfloor adhesive with a powerful, permanent bond, try Loctite PL 400 VOC Subfloor & Deck Adhesive. It sets quickly and is ideal for heavy-duty interior or exterior subfloor installation in all types of environmental conditions. That means it even bonds wet and frozen lumber!
Can I use framing nails for subfloor?
Combining the versatility of a nail with the hold strength of a screw, they can be used with most framing nailers – meaning these subfloor fasteners can be driven much faster than screws.
Is it OK for subfloor to get wet during construction?
Most of the time, however, a little rain and snow will not damage the subfloor. If at all possible, you should ensure that the subfloor is at least swept off after a rain or snow storm to help prevent damage to the subfloor. You may even want to use a wet-vac to remove as much of the water as possible.
Is AdvanTech sheathing tongue and groove?
With advanced resin technology and high wood density, AdvanTech sheathing panels stand strong on the job and for years to come. The T&G stands for Tongue and Groove and is primarily used for subfloor because of its edge-to-edge snapping.
Can AdvanTech be sanded?
With an industry-leading warranty and unmatched 500-day no-sanding guarantee, AdvanTech flooring is the flooring panel that more builders trust. It’s engineered for superior strength, moisture resistance and quality so you can build the quiet, stiff floor your homeowners demand.
