Key Replacements

Take your existing key and lock to a hardware store (Ace, True Value, Do it Best, etc.), locksmith or other outlet that sells Master Lock products. Ask them to order the product with the same key number that is on your key. Please call ahead, as not every retailer will provide this service.

Are Master Lock keys universal?

No. Without the key number, there is no way for Master Lock to know which key will open your lock. There is not a master key that will open all Master Lock products.

Can you make a spare key for a Master Lock?

A: Master Lock does not provide keys directly to consumers; however, you may take one of your keys to a local hardware store, home center or locksmith where they can cut duplicate keys. Please note that not every store will have the appropriate key blanks available.

Can a locksmith open a Master Lock?

The best way to unlock a master lock is to call a professional emergency locksmith service to do the job for you. It might be a bit expensive compared to some of the other methods, but you will save a lot of time in the process. A professional locksmith will be able to make you a spare key for the lock.

Is there a key that can open any lock?

A bump key can open any lock that it fits into. It’s helpful to have in your pocket if you ever lose your keys, because it can open your door lock and your deadbolt, even if they normally require seperate keys.

How do you break a rusted lock without a key?

Use a small or light-duty hammer to give the lock a few mild blows. This may be enough to break the rust seal. Try to strike it at the top of the lock near the shackle holes.

What is a 999 key?

Bump keys are specially cut keys that can bypass the security mechanisms built into traditional pin and tumbler locks. Bump keys are also referred to as “999 keys” because all of their ridges are cut to the maximum depth (999) in a key-making machine.

How does a master key open all doors?

Most master key systems work off of a basic pin tumbler lock. To open a lock a pin stack consisting of a driver pin and a key pin must be elevated so that the two rest on opposite sides of the shear line. A key lifts key pins within a lock. These key pins are all different sizes.

Do Master locks come with 2 keys?

– Non-rekeyable, 4-pin W7 cylinder helps prevent picking. Keying Option: Keyed Alike (7KA). All No. 7 Padlocks come with 2 keys.

How do you open a Master Lock without the code?

To open combination locks without a code, start by pulling up on the dial and turning it clockwise until you hear the lock click. Then, check what number you’re at, add 5 to that number, and write it down. Next, set the dial to that number and turn it counterclockwise until you hear it click again.

Can you duplicate a key that says do not duplicate?

You Can Still Duplicate Your “Do Not Copy” Keys

The “Do Not Copy” inscription on a key acts as a warning, but it does not actually prevent someone from duplicating the key. That means that if you bought your locks from a reputable locksmith, you’d need to go to the same company or locksmith and ask them for new keys.

How do you break a Master Lock without a bolt cutter?

By far the easiest way to cut a padlock is with bolt cutters.

How to Cut a Padlock Without Bolt Cutters (9 Quick & Easy Methods
Use an Angle Grinder. Use a Dremel. Use a Propane Torch and Hacksaw. Use a Cutting Torch. Use a Hammer. Use a Shim. Lock Picking.