DRYLOK Pro offers mold and mildew resistance, stops water under hydrostatic pressure and water entering by wind driven rain. The warranty is the the greatest of any of our DRYLOK products. The color selection is more extensive than that of DRYLOK Extreme. DRYLOK Pro was formulated to accept a larger spectrum of color.
Is there anything better than DRYLOK?
per gallon of coverage, Sani-Tred can waterproof larger surfaces using less material and lowering your costs. Not only does Sani-Tred actually waterproof your basement, it has better coverage for less money in the long run. Drylok appears to be the more economical choice.
How long does Drylok extreme last?
How long will DRYLOK® Masonry Waterproofer maintain its effectiveness? A. When applied according to directions, DRYLOK® Original Masonry Waterproofer is warranted for 10 years, DRYLOK® Extreme Masonry Waterproofer is warranted for 15 years, and DRYLOK® Floor & Wall Masonry Waterproofer is warranted for 7 years.
Is Drylok extreme good for basement walls?
For maximum protection, I opted for DRYLOK Extreme. Recommended for the most demanding conditions and capable of resisting the hydrostatic pressure equivalent to a 33-foot-tall wall of water, DRYLOK Extreme does what other, broadly similar products do, only better.
How many sq ft does a 5 gallon bucket of DRYLOK cover?
5 gallon can. Coverage 375-500 Sq. Ft.
How many coats of DRYLOK should I do?
APPLY TWO COATS. Allow to dry 2 hours between coats. The second and subsequent coats may be applied by roller, brush, or spray.
Should I use kilz before Drylok?
In general, it is not a good idea to apply a solvent-based coating to masonary latex, but if you still have discoloration after three coats of drylok, you should use kilz [or any solvent-based primer] to seal the stains.
Which is better Drylok or kilz?
Both products are excellent for waterproofing basements. Nevertheless, Kilz is rated as the better of the two. While all kilz surfaces can be built with the exception of masonry, drylok was designed specifically for masonry surfaces. It is possible, however, that either product will resist high water pressure.
Can I use Drylok over kilz?
A. Yes and no. DRYLOK® may be used over any other cementitious-type waterproofing paint in good, repaintable condition, either inside or outside. However, DRYLOK® cannot be used over an oil or latex-based paint on the inside of a building.
How do I prepare my basement for Drylok?
DRYLOK paint should only be applied after you prep walls by cleaning them with a wire brush, removing salt deposits and sealing cracks and holes. Paint the walls when the temperature is at least 50 degrees Fahrenheit, optimally during a rain-free period when humidity levels are not high.
Does Drylock prevent mold?
Does Drylok prevent mold? Yes, Drylok helps to prevent the development of mold and mildew because it is designed to prevent water from penetrating through foundation walls. The product provides an ‘inert coating’ which means it does not promote the growth of mold or mildew.
Can you use Drylok on Sheetrock?
Can Drylock Be Used On Drywall? The products are not designed for interior use. If you were to use paint, you would not have to worry about the paint wearing out since there would be off gasses not intended for a confined area. If you’re going to use a damp environment, you should use a kitchen and bath enamel.
Does Drylok extreme really work?
So, yes Drylok paint does really work. This is why it is such an excellent choice if you struggle with damp or water problems in your walls or floor. Just ensure that the surface is not wet when you apply the paint.
Can you seal basement walls from the inside?
Apply a masonry waterproofing product to the walls
Seal/coat the interior of the walls with a suitable masonry waterproof product. When the paint dries, the sealant forms a watertight bond to stop water from seeping through. This is how you can waterproof your basement walls from inside.
Can I use Drylok extreme on my basement floor?
In addition to garage floors, basement floors, brick patios, poured concrete and block patios, and wood steps, DryLok can also be used on concrete floors. These surfaces can be beautified and prolong their life with this product.
Can you put DRYLOK over paint?
Yes and no. DRYLOK® may be used over any other cementitious-type waterproofing paint in good, repaintable condition, either inside or outside. However, DRYLOK® cannot be used over an oil or latex-based paint on the inside of a building.
How long does Drylok extreme take to dry?
DRY TIME: 2 hours • To recoat: 3 hours Note: Maximum cure and dry time will be prolonged when slightly humid and damp, cool conditions prevail. CLEAN UP: Warm soapy water Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.
Does DRYLOK smell?
Sealing basement walls against water seepage is often unpleasant because of the strong odor of solvent-based waterproofing paints. A new latex-based waterproofer from the manufacturers of Drylok, one of the best-known basement-wall paints, eliminates much of the odor while retaining Drylok’s sealing ability.
