Zinsser® B-I-N® Shellac-Base Primer is a primer-sealer/stain killer/bond coat recommended for application to interior ceilings, walls, doors, trim, cabinets, furniture and related paintable surfaces. Exterior uses are limited to spot priming only.
Do you have to sand before using bin shellac primer?
In addition to preventing bleed through, BIN Shellac sticks to any surface without sanding. It can be used inside or for spot-priming outside and it can also be used under-or-over any chalk, milk, latex or oil based paint. It dries really fast, too. Once applied, it dries to the touch in about 10 to 15 minutes.
Do you have to paint over shellac primer?
As opposed to painted cabinets, shellac does not hold paint well unless it is prepared before application, which requires extra preparation. If you want to prevent the paint from flaking off the surface at a later date, you must remove the shellac first.
What does bin primer mean?
B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains.
What does Bin stand for in shellac?
Blocks-In-Nastiness.
Can I put shellac over paint?
If you are careful to apply it properly, you can use shellac over acrylic paint. The wood can be sealed with one coat. Rub it liberally on the surface and wipe it off to seal it.
What kind of paint do you use on shellac primer?
Any oil or latex paint can be applied over it. Professionals love B-I-N because it dries faster than any other primer. It cures as fast as it dries, making it ideal for kitchen cabinet repainting, doors, and trim work.
What is the difference between Zinsser BIN and Zinsser 123?
The quick dry formulation gives Bulls Eye 1-2-3 a 30 minute drying time with a 1 hour recoat time. Zinsser B-I-N is a shellac-based alternative to Bulls Eye 1-2-3 and is perfect for interior priming or for exterior spot priming.
Do you have to paint over bin primer?
Should I Paint Over A Bin Primer? If you are experiencing persistent knots and sap streaks, use B-I-N Shellac-Base Primer to identify prime persistent bleed. If you are experiencing full surface priming, use oil-based primer or water-based primer. It is necessary to apply coats of paint.
What kind of paint do you use on shellac?
Latex paint can be used over shellac or oil-based primer.
Will water based paint stick to shellac?
Waterborne paint must be dewaxed if it is to be used. You can apply denatured alcohol to shellac surfaces by soaking it in a clean rag and rubbing it over them.
How do you paint shellac?
All you have to do is soak a clean rag in denatured alcohol and rub it over the surface of the shellac. This dissolves the finish and gives you a clean slate for putting any type of paint over the surface of the wood. You may want to consider applying a primer before moving ahead with a new coat of paint.
Do you have to sand after bin primer?
Bin’s is very sandable and should be sanded between coats. When you apply it, work fast, get it on as even as you can, but do not try to over work it. It flashes fast and trying to overbrush partially dried bin’s will cause it to curl and drag. Shellac sands very easily and boo boos can be fixed, no problem.
Is Bin shellac primer toxic?
Even though you are not chemically sensitive, it is very important to protect yourself while doing the work. B-I-N Primer is not a green product and the gases it gives off initially are harmful.
What is bin shellac made of?
Shellac has an Ancient History
Shellac, as the word is commonly used, refers to all forms of purified lac – a natural resin secreted by the tiny lac insect on certain trees, principally in India and Thailand.
Is bin a bonding primer?
As far as your dark cabinets go, BIN is the bonding primer.
