Set the drain to its open position. Unscrew the knob on the top of the drain stopper to see if there is a set-screw underneath. If your drain stopper has a set-screw, use a small screwdriver or a hex key to unscrew it. Twist the entire stopper counterclockwise until it pulls free from its mounting post.

Why can’t I unscrew my bathtub drain?

Sometimes the post threads may be stripped, making it difficult to unscrew the stopper. Try gently pulling upward while turning. If your stopper does not have a visible screw set on the knob, but does not seem to unscrew, lift the stopper up and turn, looking for a small screw.

How do you remove an old shower drain?

Step 1: Remove Any Clogs. Start by turning on the shower for a couple of minutes and observing how your shower drains. Step 2: Lubricate the Drain. Prying your shower drain free can be tricky, especially if it’s been in situ for a long time. Step 3: Remove Any Screws. Step 4: Loosen the Drain. Take the Shower Drain Out.

How do you remove tub drain with pliers?

Lift-and-turn
Open the drain and keep it in an open position.Unscrew the knob that rests at the top of the stopper.After unscrewing the knob, check to see if there is a set-screw underneath. Twist the stopper counterclockwise until it’s free of its mounting post.Remove the mounting post with pliers by pulling up.

What tool do you use to remove a tub drain?

If your drain doesn’t have crossbars, you’ll need to use a tool called a tub drain extractor. It has a conical shape and helical knurls that grip the metal wall on the inside of the drain fitting. You turn the extractor with an adjustable wrench.

How do I remove a shower drain without caulking?

How to Remove the No-Caulk Shower Drain Cover:
Use a screwdriver for the removal.Place the end of the screwdriver under the notched area of the strainer.Apply light upward pressure while being careful to not damage the finished surface.No-caulk shower drain cover should release from shower base.