To reset your Pro1 T705 Thermostat, remove the thermostat from the wall (if needed) and then remove the batteries. Wait for about 10 to 20 seconds and then put the batteries back. This should reset the thermostat.
Why is my Pro1 thermostat not working?
The most possible reason why a Pro1 thermostat T705 is not working is an incorrect setting of the HVAC system switch or the fan switch. If the display is blank, the cause is most probably dead batteries. These problems can easily be solved by replacing the batteries and resetting the thermostat.
How do you turn off the schedule on a Pro1 thermostat?
Your thermostat will be in permanent override if you press the up or down temperature keys and then press the “hold” key. You will notice the word “hold” near your setpoint and now your thermostat will stay at your setpoint temperature until you press “run sched” or turn the system switch to “off”.
Does a pro thermostat have a reset button?
Reset to Factory Default Settings
To reset the Honeywell T5+ / T5 / T6 Pro Series Thermostats to factory default settings, you should follow these steps: Check whether the device is on (it should be on). Press the menu button and hold it for 5 seconds. Now scroll to the left and stop when you see ‘Reset’.
What does Stage 1 and 2 mean on my thermostat?
The second stage is the full capacity of your system. 1/3 compressor capacity is the 1st stage. 1st stage is more efficient than 2nd stage, but systems are designed to use both stages, so no worries there.
What does the hold button do on a thermostat?
This is where the “Hold” button on your thermostat comes into play. By pressing “Hold”, your thermostat will lock in the temperature it’s currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.
How do I reset the wifi on my HP Pro1 thermostat?
Delete the Pro1 app from your device and reinstall it. Add the address where the thermostat is installed. Your device must be connected to your home WIFI network to finish. On your thermostat, reset the thermostat’s WIFI by holding both the and buttons at the same time for ve seconds.
How do you reset a T701 thermostat?
Reset the Thermostat
To reset your T701 thermostat, remove the battery cover and then remove the batteries. Wait 10 to 20 seconds and then replace the batteries and the cover. This should reset your thermostat and possibly fix the display issue.
How do I connect my Vive thermostat to WIFI?
Press and hold the light button on your thermostat until the backlight flashes 3 times and the thermostat’s network appears on the thermostat screen. It will begin with “TSTAT”. Then press the Got It button. Note: When using an Android phone press the lower right back button to return to this screen.
How do I lock my pro1 thermostat?
Note: To lock the keypad hold down the and keys for 3 seconds. You will see a lock in the display. To unlock the keypad hold down the and keys for 3 seconds. This thermostat has a technician setup menu for easy installer configuration.
