It is the same high quality tung oil used in all of our tung oil products. Use on bare wood only. Waterlox Pure Tung Oil is 100% pure tung oil with no additives or driers.

Is Waterlox waterproof?

Waterlox is a superb choice for finishing wood countertops because it produces an incredibly appealing and durable surface. It is waterproof, food-safe and easy to maintain. Waterlox literally locks out water and locks in the natural beauty of wood.

How long does Waterlox take to cure?

Allow each and every coat to dry for 24 hours. Dry time will depend upon ventilation, humidity and temperature. CURING Even though the recommended dry time is 24 hours, Waterlox Original Tung oil finishes completely cure in 30 – 90 days.

Is Waterlox better than tung oil?

While Waterlox Original Tung oil finishes contain a superior drying oil, namely Tung Oil, they are fully cooked varnishes, which dry quicker and form permanent films tough enough to walk on and take daily abuse. Waterlox Original Tung oil finishes are also water and chemical resistant (alcohol and alkali).

Is Watco like Waterlox?

(Note that Watco is a “mixture” of oil and varnish while Waterlox is oil and resin that are cooked to create something different, varnish, with different characteristics.)

Is Waterlox a polyurethane?

Waterlox URETHANE finishes are the ultimate in clear polyurethane finishes for indoor use and outdoor use (not in direct UV).

Does Waterlox yellow?

Unlike linseed oil-based polyurethanes, our URETHANE formula will not yellow over time. Excellent water resistance. Non-toxic when dry and fully cured.

Is Waterlox any good?

Made the finished product look amazing. The base coats using Waterlox Original was too shiny for our kitchen, so adding this top coat in Satin (which is what the website said to do) made the wood look incredible. The countertop has been in use since October, 2016 even around the kitchen sink and it still looks great.

Do you sand between coats of Waterlox?

Sanding for adhesion purposes is not required between coats of Waterlox Original Tung oil finishes. This makes Waterlox unique and different from most surface finishes which need abrasion for inter-coat adhesion.

Is Waterlox good for outdoor use?

Our exterior Waterlox products are created to withstand the elements. They protect wood surfaces from harsh weather and UV rays while enhancing the beauty of the wood grain. Waterlox is an excellent choice for almost any exterior wood door, bench, boat or woodworking project.

How many coats of Waterlox should I use?

It is recommended to apply two additional coats of Waterlox ORIGINAL Sealer/Finish or two additional coats of a Waterlox Finish overtop to fully waterproof and protect. For exterior, sun exposed projects, use the MARINE finishes. SANDING IS NOT REQUIRED PRIOR TO YOUR FIRST COAT OF FINISH.

What temperature do you apply Waterlox to?

During application of Waterlox wet-applied finishes (ORIGINAL, H2OLOX®, URETHANE or MARINE), the product, project surface and environment should be close in temperature and at least 50°F during application and at least 1-2 hours afterward. When both the product and surface are cold, they are less compatible.

Is Waterlox scratch resistant?

Waterlox is more scratch resistant (not scratch proof) and CV is more chemically resistant. Between CV and Waterlox, you have a give and take.

Can you use Waterlox over tung oil?

Waterlox ORIGINAL products are compatible with 100% PURE Tung Oil; provided the PURE Tung Oil has been applied and cured for over 30 days.

Is Waterlox a varnish?

And Waterlox is varnish, specifically a phenolic resin/tung oil varnish.

How many coats does Watco have?

For Watco Danish Oil, 2 coats will usually be good enough. It’s used for finishing the wood’s appearance, and the difference in look will be minimal as between the second coat and a third coat.

How long does Watco Danish Oil take to cure?

Wipe surface completely dry. Ready for use in 8-10 hours 5. If a topcoat is required, use Varathane® Interior Diamond Wood Finish (oil based or water based) or Varathane® Professional Clear Finish. Allow WATCO® Danish Oil to dry 72 hours before applying.

What is similar to Waterlox?

Linseed and tung oils will provide you with a lusterous repairable finish that won’t be as durable or water resistant. You will need to re-apply these with some sort of regularity. From what I undersand, Pratt and Lambert 38 is a comparable quality finish with respect to durability.