If the sprinklers do not turn on you may have a valve shut down that supplies the irrigation system. If the sprinklers come on, you may have a wiring problem at the valves. Check the wiring connections at the valves for loose or corroded connections.
How long should I run my hunter sprinkler system?
Typically, you will want 10-13 minutes of run time in the spring and fall, and anywhere from 12 to 17 minutes of run time in the summertime. For flower beds, you will want to use double that amount of time if you are using a drip system, or half if you have a spray system.
Is Hunter better than Rainbird?
Hunter products are slightly more durable than Rainbird. They can handle a greater PSI which is important when it comes to water pressure, winterization and extreme weather. Sprinkler heads sit in the ground which experience extreme temperatures.
Which irrigation system is better Hunter or Rainbird?
So at the end of the day, both Hunter and Rainbird offer high-quality, affordable home and commercial irrigation systems. However, Hunter systems consistently outperform the competition — all of it — when it comes to durability.
Why is my sprinkler system not getting water?
Clogged sprinkler heads: You may have a clogged sprinkler head if the head doesn’t rise and there is no water. Dirt, sand and other debris build up in the sprinkler head filters. To clean a filter: Turn off your water, lift the pop up riser, remove the nozzle and the filter, clean the filter and return to the nozzle.
How do you manually turn on a Hunter sprinkler system?
How can I manually start a station on my Hunter Eco Logic
Press and hold the button for three seconds. Select program by pressing the button.Use the or buttons to select the amount of time for the station to water if different from the run time displayed.Use the button to move to the next station.
How do you test a hunter sprinkler system?
To initiate the test program:
Press and hold the PRG button. The station number will be flashing.Press the or button to scroll to the station you would like the test program to start with. Use the and buttons to set a run time of up to 15 minutes. After a 2 second pause, the test program will begin.
Where is the reset button on a Hunter thermostat?
Press the end of the paper clip into the “Reset” pinhole and hold it for two seconds to clear the programming. The location of the hole varies depending on the model, but it is usually located near the bottom or side of the front panel and is clearly marked.
What is interval on Hunter Pro C?
ICC. Interval Watering is a feature that allows you to select the number of days to pass before the next watering day. For example, an interval of 3 will cycle the program once every three days and water on the third day. An interval of 1 is every day and an interval of 2 will water every other day.
How do you measure sprinkler water?
Use a ruler to measure the depth of the water in your cans and then take the average between the two. (The amount of water in a sprinkler’s spray pattern will vary depending on how close you place your cans. You can find the average by adding the amount of water in each can and divide that amount by two).
What is the best brand of sprinkler system?
Our top picks:
Best Sprinkler for Large Lawns: Nelson RainTrain Traveling Sprinkler.Best Sprinkler for Small Lawns: Gilmour 887603-1001 Spot Sprinkler.Best Oscillating Lawn Sprinkler: Melnor XT4200M Oscillating Sprinkler.Best Impact Lawn Sprinkler: Orbit 56348 Brass Impact Sprinkler.
Who owns Hunter irrigation?
A Commitment to Partnership, A Legacy of Innovation
Hunter Industries was founded by irrigation industry pioneer and entrepreneur Edwin “Ed” Hunter with the help of his sons Paul and Richard, and daughter Ann. In 1983, the small Hunter team introduced the PGP gear-driven rotor to the world of irrigation.
