Engineered Hardwood
Before installing glue-down or nail-down floors a 3/8″ plywood underlayment should be fastened to DRICORE® using 3/4” 18 gauge narrow crown staples. When installing nail-down floors test a piece of the finished floor to make sure the fastener does not puncture the plastic membrane.
Do you screw down DRIcore?
Remember that DRIcore must be installed as a floating floor. Normally it is not recommended to nail, glue or screw DRIcore panels to the concrete surface. In some instances, we suggest minimal fastening of the panels to the concrete surface.
What is the best subfloor for a basement?
Rigid foam is an excellent basement subfloor option because it provides a thermal break between concrete and flooring.
Finish flooring.Plywood screwed down through the layer below.Rigid foam insulation—1 1/2-inch thick.Concrete basement floor.
What is the R value of DRIcore subfloor?
Designed with a layer of extruded polystyrene foam (XPS), DRICORE R+ delivers an R-value of 3.0. The secondary layer of oriented strand board (OSB), provides a solid foundation that can support any type of finished floor and furniture.
Which is better DRIcore or barricade?
DRICORE Subfloor covers cold, damp concrete to protect and insulate your floor (R-Value of 1.4). BARRICADE Subfloor Air Plus softens finished floors to cushion against the hard concrete. Its sturdy confection supports over 6,600 pounds per square feet.
Can you build walls on DRIcore subfloor?
DRIcore® panels can be installed where there is an existing wall frame or a concrete foundation wall. Where only a concrete foundation exists, it is best to install wall framing directly on top of DRIcore® panels to elevate the floor and wall framing away from direct contact of potentially damp concrete.
What is the warmest flooring for a basement?
A cork floating floor is an excellent insulating product for cold basements. It is the best flooring for basement. Add in a cost effective 6mm cork underlayment and you will have built an “insulated” floor.
Do you need subfloor over concrete?
Do I Need a Subfloor Over a Concrete Slab? While a subfloor is not necessary to add structural strength when you’ll be laying finish flooring on top of a concrete slab (as in a basement remodel), subflooring over concrete offers two other advantages: Dampness control.
How many DRIcore panels do I need?
Typically one leveling kit is used for every 60 panels. DRIcore® panels provide an easy ready-to-use wood subfloor to add your favorite finished floor. A typical 500 square foot room installs in an afternoon so you can spend more time with your family.
Can OSB be used as subfloor?
Most local codes allow OSB to be used for subflooring. It’s always best to check with your local permitting office before using OSB for your subfloor. One advantage that OSB has over plywood is its larger formatting. For plywood, 8-foot and 10-foot long sheets of plywood are standard.
