B-I-N®, developed in 1946, is the original shellac-based white-pigmented primer-sealer stain-killer. Great for use on all interior surfaces & spot priming on exterior surfaces. It is formulated to seal, prime and block out stains on previously painted or new work. Any oil or latex paint can be applied over it.
What’s the difference between Zinsser BIN and Zinsser 123?
The quick dry formulation gives Bulls Eye 1-2-3 a 30 minute drying time with a 1 hour recoat time. Zinsser B-I-N is a shellac-based alternative to Bulls Eye 1-2-3 and is perfect for interior priming or for exterior spot priming.
Do you need to sand before using Zinsser BIN primer?
Bare wood that has been exposed for more than 4 weeks should be lightly sanded with 80-100 grit sandpaper to remove loose or weathered wood fibers. For new Cedar and Redwood applications, allow B-I-N Shellac-Base Primer to dry 24 hours before painting or topcoating.
Can you paint water-based paint over Zinsser BIN?
The 2-hour recoat on Zinsser Cover Stain makes it easy to paint over it on the same day, even with water-based paint. It can also be used to coat a full wall or ceiling. You can loosen the Cover Stain by diluting it with white spirit and letting it sit for a few minutes.
What is bin paint used for?
B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains.
Do I need to undercoat after Zinsser BIN?
Yes and use the same brand of undercoat for whatever the topcoat is you choose as Dr Decorator advised.
Do you sand after using bin primer?
Answer: Yes, but the paint will form a stronger bond scuff sanding the primer before painting. If you’re able to sand the ceiling without damaging the texture, scuff sand it with a drywall sanding sponge. If you don’t sand the primer, the paint’s not going to peel off the ceiling.
Can I use Zinsser 123 as an undercoat?
Zinsser Bulls Eye 123 Primer is a fast-drying white-pigmented acrylic latex (water-thinnable) undercoat. It is formulated for use on most types of exterior and interior surfaces – previously painted or new work.
Can I use a roller with Zinsser BIN?
If you are working on a small project, a foam roller is fine! If you’re working on a larger project I recommend a microfiber roller. In addition to preventing bleed through, BIN Shellac sticks to any surface without sanding.
Do you have to paint over bin primer?
Should I Paint Over A Bin Primer? If you are experiencing persistent knots and sap streaks, use B-I-N Shellac-Base Primer to identify prime persistent bleed. If you are experiencing full surface priming, use oil-based primer or water-based primer. It is necessary to apply coats of paint.
When can I paint over Zinsser primer?
When Can I Paint Over Zinsser Primer? The coating can be applied in 30 minutes with latex or oil-based paints after drying for 5 minutes. If you want the best results, let primer cure overnight before applying strong solvent-based topcoats.
Is Zinsser BIN primer oil based?
The rest of the test pieces are all sanded quickly with 200 grit sand paper, and painted with 3 different primers. Zinsser 123 water based primer, Zinsser Cover Stain oil based primer, and Zinsser BIN shellac based primer. They all held up MUCH better than the first two in the scratch tests.
Is Zinsser BIN an adhesion primer?
Zinsser BIN is a stain block, adhesion primer and barrier coat all in one. With a drying time of 15 minutes and re-coat in 45 minutes. Zinsser BIN can be very handy to have on any decorating project.
Is Bin shellac primer water based?
B-I-N® Advanced Synthetic Shellac Primer is a synthetic shellac-based primer sealer that provides excellent stain blocking for whole-surface interior priming and exterior spot priming. It combines fast dry time, low odor, excellent hide and stain blocking for new construction, remodeling and fire and water restoration.
What does Zinsser BIN mean?
ANYway, lots of history on the net about Zinsser: In 1946, Zinsser introduced the country’s first quick-drying, stain- and odor-sealing white-pigmented primer: 3-Purpose Bulls-I-Namel (later called B-I-N). This product performed three functions: priming, sealing, and killing stains.
Is Bin primer supposed to be watery?
You need to know it is very watery and takes some care to lay down a nice finish. Always paint back into a wet edge, and work fast. It dries very quickly. If used properly and applied well there is no better primer.
Can you gloss over Zinsser BIN?
Can You Use Zinsser Bin Over Gloss? In the original gloss boards, which did not have water-base-coat painted, the B-I-N adhered really well to the gloss, giving it a great coverage and drying very quickly.
