It’s the ideal ceramic tile underlayment for new construction, bathroom remodeling, pool areas, and many other high humidity or wet areas1. Easier to handle than cement board, DensShield Tile Backer cuts and installs like drywall without special tools or fasteners. It can also be painted or used in non-wet areas.

Can DensShield be used around fireplace?

DensShield Tile Backer should not be used in commercial saunas, steam rooms, around fireplaces or areas where prolonged exposure to heat exceeds 125° F (52° C). DensShield Tile Backer panels should not be used as a shower pan base or in shower floors and curbs.

How do you seal DensShield seams?

By caulking the intersecting corners of DensShield Tile Backer panels and around a tub base or shower pan with flexible sealant, a moisture-resistant envelope can be established. The sealant should be applied to the DensShield Tile Backer corners PRIOR to taping the joints.

What is the best backer board to use in a shower?

Cement board is a good, reliable backer board that works well on both floors and walls. Keep in mind that most tile setters err on the side of caution and brush a waterproofing membrane on top of cement board when it is in wet areas like showers or tub surrounds.

Can I paint DensShield?

Dens-Shield may also be finished with paint or wallpaper for non-tile areas that require superior fire and moisture resistance where its vapor barrier and water- repelling qualities are desirable. Dens-Shield also adds stabilizing and fire-resistant qualities to countertop installations.

What size sheets does DensShield come in?

DensShield 1/2 in. x 4 ft. x 8 ft. Backer Board 855000.

What thickness does DensShield come in?

Standards and Code Compliance – DensShield Tile Backer in 1/4” (6.4 mm), 1/2” (12.7 mm) and 5/8” (15.9 mm) thicknesses conforms to current IRC and IBC codes and is manufactured to meet ASTM C1178 as a fiberglass mat gypsum substrate for use as tile backer.