Non Chlorine Shock is a powerful, odourless oxidising agent, which essentially means it works to eliminate contaminents in hot tub water. Oxidation is different to sanitisation. Oxidation is the breaking down of the oils and organics in your water whereas sanitisation is the killing of bacteria.
When should you use non chlorine shock?
Hot tubs and spa water can often reach temperatures of over 100°F. However, these high temperatures alone aren’t enough to kill bacteria and organic matter. That’s why it’s beneficial to use non-chlorine stock—it’ll oxidize hot water just as well as it oxidizes lukewarm pool water.
Is non chlorine shock harmful?
Conclusion. Non-chlorine shock is a good option if you want to get rid of organic debris and murky water and go right back to swimming. It is also effective to reduce combined chlorine. If you have an algae bloom or are worried about extra bacteria from a heavy load of swimmers, only chlorinated shock will do the trick
Can I shock a pool with no chlorine in it?
Potassium peroxymonosulfate: A less costly, non-chlorine shock. Add it directly to your pool water at any time. Takes roughly 15 minutes to work before you can safely swim.
How long does it take non-chlorine shock to work?
Choose your dose of shock according to the package and label. Be cautious while putting shock into the water. After NON-CHLORINE shock wait 10-15 minutes before entering. After chlorine shock it can take up to 24 hours to clear.
Can you use too much non-chlorine shock?
If too much is added, it can cause the overall pH level of the pool to drop for a sustained period, which you’ll then have to raise. Whereas, with a chlorinated shock, if you overdose the pool on it, all you have to do is wait a few extra hours for the sun to burn off the chlorine.
Does non-chlorine shock raise free chlorine?
That said, it should be noted that non-chlorine shocks don’t kill algae, or raise the chlorine level. Your FAC level should be around 1.5 ppm for a non-chlorine shock to work effectively. If the pool has algae, or there has been a fecal accident, always use a chlorine-based product.
What is the difference between chlorine shock and non-chlorine shock?
Non-Chlorine shock will destroy your basic bacteria, but for the stronger varieties, it just can’t get past their defensive walls. For control of pathogenic bacteria, those that can make you sick, a shock treatment with chlorine will neutralize 100% of germs, to sanitize and disinfect the water.
Can I add non-chlorine shock and chlorine at the same time?
Adding chlorine besides the shock can increase the chlorine content in the water which can make the entire shocking process useless. Hence, it is better if you don’t use the shock and chlorine at the same time. The best time to add chlorine to the pool water is after you have shocked the pool.
Does non chlorine shock raise bromine levels?
You will find that after oxidation of your bromides using a non-chlorine spa shock your bromine level will spike, and that’s because you are really shocking with bromine!
What type of pool shock is best?
The 5 Best Pool Shocks:
In The Swim Chlorine Pool Shock — Best Overall. Check Latest Price. Clorox Pool&Spa Shock Plus — Best Value. Check Latest Price. Doheny’s Super Pool Shock. Check Latest Price. Aqua-Chem Pool Shocks. Check Latest Price. Ultima Total Control Pool Shock. Check Latest Price.
What do you do if your pool has no chlorine?
One of the simplest methods to breaking chlorine demand is by partially draining your pool. The severity of the chlorine lock determines how long this method takes. Unfortunately, there’s no exact science to this. Simply drain your pool little by little, refill it, test it, and repeat if necessary.
Can you over shock a pool?
You cannot overshock a swimming pool or add too much. Adding too much shock or overshocking your pool will kill off algae. The negative of adding too much shock is it will upset the chemical balance of your pool. It’s likely to do that regardless of if you overshocked the pool or not.
What can I use instead of pool shock?
Shock. Common unscented household bleach (sodium hypochlorite) works well to shock a pool. To increase the chlorine level by 5ppm in a 10,000 gallon pool, you would need 1/2 Gallon of basic household bleach.
How soon can you use hot tub after adding chemicals?
Do not use a hot tub right after you add chemicals. You should wait at least 2 hours before using the hot tub again. The chemicals need time to work their magic and sanitize the water. Also, a higher concentration of chlorine is best because you’ll need to add chemicals less often.
