First, wet your Magic Eraser Foaming Bath. Water activates the tough micro-scrubbers, so they can dig deep and remove hard water stains from glass and the toughest soap scum, making cleaning shower glass easier than ever.
For a clean ceiling, just add a little water to your Magic Eraser. The Magic Eraser Extra Durable is 50 percent stronger than the Magic Eraser Original, so it has more muscle and lasts longer. Wetting it helps get the micro-scrubbers inside ready to erase any scuffs or stuck-on dust hanging around your ceiling.
Cleaning the stained area of the ceiling with a mild homemade bleach solvent (one cup of bleach and three cups of warm water) will fade the stain and remove any lingering mildew, grease, dirt, or dust that can prevent primer and paint from adhering to the ceiling.
To cover over the water stains, use a stain-blocking primer on the affected areas. Kilz and Zinsser both offer ceiling paints for this purpose. Kilz has a product called Upshot, which is a spray-on ceiling paint designed to match an aged white ceiling.
When not to use Magic Eraser
Shiny painted, enameled, sealed, or varnished surfaces. Magic Eraser can strip away the finish.Wood. Magic Erasers can scratch and strip the finish.Your car. Natural stone surfaces, including granite and marble. Non-stick pots and pans. Stainless steel. One-of-a-kind collectibles. Screens.
5 Methods for Removing Hard Water Stains
Vinegar. Vinegar is a safe, all-natural household cleaner with the amazing ability to combat hard water stains. Hydrogen Peroxide & Cream of Tartar. Baking Soda. Fluoride Toothpaste.
While Magic Erasers can be used to get crayon marks off a painted wall, don’t use them to clean wood paneling or other finished wood surfaces. The abrasiveness can strip away the finish. These 100 essential cleaning hacks come in very handy around the house.
But, cleaning marks off walls is actually pretty easy! For this type of job, you need the Mr. Clean Magic Eraser Extra Durable. When you use the Magic Eraser, wall marks will virtually disappear.
Look for mold. Moisture creates a hospitable atmosphere for bacteria, and materials such as drywall, carpeting and insulation are especially friendly to fungal growth. If bacteria has had time to set in, it means the water spot has been on the ceiling for at least two or three days.
Mix one-part bleach with four parts water in a spray bottle. Mist the discolored area and lightly dab it with a sponge, then wait a couple of hours to see if the stain comes out. If it doesn’t, add more bleach to the spray bottle and try again in another area until the solution appears to be effective.
KILZ® UPSHOT® Stain sealer blocks out most stains caused by water, smoke, tannin, ink, pencil, felt marker, grease and seals pet and smoke odors.
Fill a spray bottle with white vinegar, spray the stain and let the vinegar sit for an hour until it’s absorbed. If the stain persists, make a solution of 1 teaspoon baking soda and 2 cups of water and pour it in a clean spray bottle. Spray the stain with the solution and scrub.
Polycell Stain Stop is a highly pigmented paint which permanently prevents stains reappearing through paint. It provides one coat coverage over water stains, grease, nicotine, crayons, rust and soot.
It works because when melamine resin cures into foam, its microstructure becomes almost as hard as glass – causing it to act like super-fine sandpaper on stains. The abrasive foam loosens up dirt and grime, and the open microstructure of the foam sucks it in and traps it there.
Rinse off the eraser after use. This will remove the dirt and debris and extend the life of your eraser. Test in an inconspicuous place if you’re unsure. Don’t use them on your skin.
A Magic Eraser is actually made of melanine foam. It’s basically foam that’s hard as glass and acts as a really abrasive sandpaper, meaning, yeah, your teeth are white because you scrubbed all the enamel off. So, in fact, no, don’t do this.
