The UniFi Video configuration portal is accessed by using a web browser. There are two ways to access the portal: Ubiquiti Device Discovery Tool For users with a DHCP‑enabled LAN and using the Chrome browser. Direct Connection to UniFi NVR Configure the UniFi NVR by connecting it directly to your computer via Ethernet.
On January 15th, 2021, UniFi Video will no longer be supported by Ubiquiti. Past this date, UniFi Video installations will no longer be remotely accessible via video.ui.com when outside of their local network.
You can access UniFi Protect anywhere by going to unifi.ui.com and signing in with your Ubiquiti SSO account. If you’d like to connect to Protect directly without going through unifi.ui.com: Make sure your computer and UniFi OS Console are on the same network. Type your UniFi OS Console’s IP address into a web browser.
That’s right, the default username is ubnt and the default password is ubnt.
Phasing out UniFi-Video products
No software or hardware revisions will be released, including for web UI and mobile applications. No customer support will be available. No security updates. All cloud operations will be shut down and video.ui.com will no longer be accessible.
Unifi Video to Protect Migration
Upgrade your Unifi Video. First, you need to make sure that your Unifi Video is updated to the latest version. Create a backup of your Unifi Video. Open settings and click on Download Configuration in the top bar.Shutdown the NVR. Set up your Unifi Protect. Import the backup. Import completed.
UniFi Protect supports all UVC (G2) and newer UniFi cameras.
Import the UniFi Video 3 configuration backup into the new Protect interface
Go to https://
UniFi Video Setup
Open the Chrome browser application on any computer on the same network as the installed software. 2. Enter in your browser’s address field. Press Enter (PC) or Return (Mac).
To enable Remote Access in your UniFi Protect application:
Access the UniFi OS Console hosting Protect via its IP address. Log in to your Ubiquiti SSO account.Go to the System Settings > Advanced menu, and enable the Remote Access toggle.
Login to the interface with: “admin”/”ubnt”. Click Users, Slect the admin user. Change the ADMIN password to a strong passphrase!!
@pjsockett – The camera password is randomly generated by the NVR. You can view it from the settings page.
Physical Reset
While the camera is powered on, press and hold the reset button for 10 seconds.Release the button (the LEDs will stop glowing).Do not disconnect the camera from its power source during the reboot process.The camera will restore factory settings after a few minutes.
(formerly Ubiquiti Networks, Inc.) is an American technology company founded in San Jose, California, in 2003. Now based in New York City, Ubiquiti manufactures and sells wireless data communication and wired products for enterprises and homes under multiple brand names.
