Dryer Heating Element Cost
For the cost of parts and labor, you should budget at least $170 to $280 for a new heating element. An appliance technician typically charges between $80 and $100 per hour for labor.
How do I know if my heating element is bad in my Maytag dryer?
Inspect the metal wire coil for any breaks in the wire. If the wire is solid and has no breaks in it, the heating element should be good. If the wire has a break in it, the heating element is defective.
Why is my Maytag dryer not getting hot?
If your Maytag dryer is not heating, it is possible that it is not being supplied with the proper voltage. Most electric dryers require two legs of 120 volts AC that is equal 240 volts. If one leg of voltage is shut off by a tripped breaker or blown fuse, the dryer may be able to run but it will not heat.
Is it worth replacing the heating element in a dryer?
If your dryer’s heating element burns out more than once within a year or two, the thermal fuse, which is supposed to protect it, is probably defective, so it’s a good idea to replace it. The temperature in the heating chamber may also be too high, and that may be caused by poor venting.
What causes a heating element to burn out in a dryer?
Dryer heating elements burn out when they overheat. Commonly causes are poor airflow, faulty temperature shut-off switches, and power surges. To prevent burn out, ensure proper and regular dryer and duct maintenance, avoid overloading the circuit, replace faulty switches, and install surge protectors.
Can a dryer heating element get weak?
Cause. The culprit here could be a faulty heating element. If the heating element isn’t working properly, the dryer will still spin and the cycle will complete, but it won’t get hot enough to help dry the clothes.
Are all dryer heating elements the same?
No one manufacturer makes all their dryers the same. If your dryer appears to have a separate rear panel that protrudes several inches from the cabinet, you can probably access the heating element from the rear of the dryer.
How long do heating elements last in a dryer?
The heating element can last between 8 and 18 years if the dryer is well-maintained and the vent and lint traps are clean. The heating element can burn out if the dryer is not kept well-maintained.
Why is my Maytag dryer blowing cold air?
If the cycling thermostat is stuck in the open position, the dryer blows cold air. The high-limit thermostat is a safety thermostat designed to keep the dryer from reaching dangerously high temperatures if the cycling thermostat does not open at its preset temperature.
How do you reset the thermostat on a Maytag dryer?
To reset the dryer if an error code occurs, press “Power/Cancel” twice and then reselect a cycle and press “Start.”
How long do Maytag dryers last?
APPLIANCE LIFESPAN How long have you had your appliance? The average useful life for appliances range from 10.6 – 11.5 years1. If you still have several years left of use, it could be more cost-effective to repair.
What is the average cost of a heating element for a dryer?
Although a dryer’s heating element can cost anywhere from $25 to over $200, the average cost of a heating element at the time of publication is approximately $35 to $60.
Is it worth fixing a 10 year old dryer?
It’s recommended as a rule of thumb that if your dryer is close to 10 years old, you’re better off replacing it outright, especially if the quote for repairs comes in high.
