Change wifi on phone to the bulb’s controller. Will look like LEDXXXXXXX. It will connect and phone will warn no internet, then go to app and discover bulb. Click on the settings icon in left, top corner and connect bulb to home wifi network.
What lights work with Magic home?
The Magic Home integration supports several brands of switches, bulbs, and controllers that use the same protocol. Chances are high that your bulb or controller (eg.
These devices have been sold under at least the following brands:
Aislan.Allkeys.Apobob.Arilux.Aubric.BERENNIS.BHGY.Brizled.
How do I connect my phone to my LED lights?
How to Use Smart LED Strip Lights with EZ Mode
Step 1: Download LampUX App. Android and iOS users can go to the App store and download LampUX App on your phone, then register an account.Step 2: Set Up the Smart LED Light Strip. Turn on the LED strip lights and wait for 10 seconds. Step 3: Connect the App.
Why are my Magic Home lights offline?
Please check if there are too many Wi-Fi connections. Please try to restart the router, wait 3 minutes and observe the status of the device. If all of the above are normal, but the device is still offline, Please reset the Smart Device and reconnect it to your Wi-Fi network.
Why is my led light app not working?
The App May Need To Be Updated
The developers may have released an update for the app but it’s not compatible with your phone or led light. In this case, you will need to update the app on your phone. To do this, go to your App Store or Google Play Store and search for the app.
How can I reset my LED lights?
Insert a paper clip, or a similar sized object, into the reset hole on the controller (depicted below). Using the paper clip, press and hold the reset button inside the reset hole for eight (8) seconds. If done successfully, the light strip will flash five times then cycle through the colors blue, green and red.
What do I do if my LED strip lights wont turn on?
LED strip does not light up at all
1) Confirm that your power supply’s voltage and current rating are compatible with your LED strip. 2) Confirm that your power supply is working correctly. 3) Check and isolate other accessories on the same circuit. 4) Check for any visible loose connections.
How long do magic light bulbs last?
The average will last around 23,000 hours. For a six hours day, or night, of being on that’s about ten years of life. Go for the top end models like Philips Hue or the Lifx range and they offer up to 25,000 hours which, with similar use, is an 11 year life.
Can you cut magic Home Pro LED lights?
Don’t worry, the RGB LED strip lights can be cut to the length you need. Most RGB LED strip lights are 16.4FT to 32.8FT in length.
How long do rechargeable light bulbs last?
The good news is the bulbs are rechargeable, so you don’t have to keep using up batteries. The downside is you have to recharge the bulbs. They last about five hours, so it’s perfect for a little mood lighting in the evening.
Why won’t my remote work for my LED lights?
If your remote control suddenly stops working or your lights start blinking, you may need to reset the controller and pair it back to the receiver unit. The controller sometimes un-pairs itself from the receiver due to a loose connection, radio interference from an external source or a low battery in your remote.
How do you set a remote control light?
This guide will teach you how to install a remote control light switch in five easy steps.
Step 1: Turn the power off. Turn off the breaker to any light switch where you plan to install a remote lighting system. Step 2: Wire the Switch. Step 3: Mount the Receiver. Step 4: Program the remote. Step 5: Test the remote.
