Gates come in a variety of styles – single swing, double drive, slide, and cantilever – and consequently require different hardware to swing or slide them. For every style of gate, there is a wheel, or two, that suit it best – it’s just a matter of knowing which one is right for yours.

Will a gate wheel help with sagging?

With large, or exceptionally heavy gates installed over smooth surfaces such as concrete, adding wheels to relieve the pressure on the hinge side gate post may be the way to make a permanent repair. Standard gates tend to sag; a wheel, or wheels, can correct this.

How do you stop a gate from dropping?

The easiest way to reinforce a gate is to attach a diagonal brace or tension rod connecting one of the hinges to the corner opposite. This equalizes the tension between each side of the gate.

How many wheels does a sliding gate have?

Two wheels is sufficient for gates up to about 20′ long. The support post nearest the operator will have a set of guide rollers attached to it that keeps the gate upright while allowing it to glide freely back and forth.

How do gate casters work?

They can carry a lot of weight by counterbalancing the load of the gate and allowing it to swing freely. Doing so will prevent the gate from hanging, dragging or worse – being torn off the hinges.

What is a gate caster?

gate caster with adjustable spring bracket is designed to allow gates to open and close freely. It features a 125 lb. load rating and a spring-loaded clamp that acts as a shock absorber when the caster is rolling over rough or uneven surfaces. It also features a universal mount for wood or metal gates.

How do spring loaded casters work?

Spring loaded casters are intended to protect delicate cargo by reducing shock exposure and decrease vibrations affecting the cargo. Shock absorbing casters help decrease noise levels while rolling and decrease the wear and tear on the floors.