Blueskin® WP 200 is a self-adhered composite membrane consisting of an SBS rubberized asphalt compound, integrally laminated to a blue, high-density polyethylene film. The membrane is specifically designed for self-adhering to a prepared substrate, and provides a high-performance waterproofing barrier.
What is blueskin used for?
Blueskin Butyl Flash Window and Door Flashing is designed for use as a concealed peel-and- stick membrane protecting against water, air and moisture infiltration. It is commonly used to provide a weather tight seal around windows and doors, joints in sheathing, and as a general flashing in residential construction.
Can you put blueskin on concrete?
-Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and plywood. -Impermeable to air, moisture vapor and water. -Easy to install peel and stick application, no flame required.
Can blueskin be used on a roof?
Blueskin® PE200HT is specifically designed to provide an exceptionally high temperature and performance roofing underlayment. It is designed to be adhered directly to roof decks or certain insulation panels prior to the application of finished roof coverings including architectural metal, shingles or tile.
Is blueskin the same as Tyvek?
Article content. There’s also a superior product — Blueskin house wrap. It has an adhesive, so instead of needing to be fastened to the sheathing, like Tyvek or Typar, it sticks to it, which minimizes punctures in the membrane. But for it to stick properly, the sheathing must be completely dry and dust-free.
Is blue skin self sealing?
Blueskin® SA is a self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, Blueskin® SA is designed to install easily on a variety of prepared substrates.
How long can blueskin be exposed?
Limitations: Blueskin® SA is designed for exposure up to 90 days if necessary to accommodate construction scheduling, but is not designed for permanent exposure to ultraviolet light and should be covered as soon as practical after application.
How do you apply blue skin?
Install Blueskin per dia- gram, adhering to the window head flange and sheathing. Upon completion of Steps 6, 7, and 8, using a J-roller, apply pressure and roll entire surface of Blueskin to remove wrinkles and air pockets. Consult with builder or design consultant on how to interface building wrap at jambs and head.
Is blue skin breathable?
This is why we install our second layer of protection, water resistant barriers. Now, it’s crucial that this layer repels moisture and allows breathability. This is why we recommend Blueskin. You get a durable, versatile layer of protection that also will tremendously boost your home’s efficiency.
How long can vp100 be exposed?
Limitations: Membrane must be rolled after application to ensure adhesion to substrate and laps. Not designed for permanent exposure, protect installed membrane as soon as possible. Maximum exposure not to exceed 150 days.
How can I apply for blueskin in South Africa?
Apply Blueskin LVC Spray Primer between 40°F to 100°F (4.4°C to 37.8°C) in order to obtain proper spray pattern. Fully open canister valve and do not close until empty. Hold spray nozzle approximately 8 to 12-inches (20 to 30 cm) from substrate and spray at a 90° angle from the substrate and even web coat.
Will Parging stick to blueskin?
To answer your question,”yes” acrylic stucco can be applied directly over Blueskin but depends on what you are using so I would need to know before approving. Also the use of fiberglass mesh when applying the base-coat is highly recommended.
How long is a roll of blue skin?
BLUESKIN 36″ x 50′ Roll Weather Barrier.
How many square feet is a roll of blue skin?
Blueskin VP100 Self Adhered Housewrap / 4-ft x 100-ft 400 Sq Ft. Sidewall / Barriers Specification: 4-ft x 100-ft.
What is high temperature underlayment?
Our High-Temperature Underlayment is a durable, self-adhering, modified composite underlayment, specifically designed to withstand the rigors of most roofing applications. It is available to use as flashing tape to provide a secondary water barrier.
What is roofing underlayment?
Roofing underlayment is a waterproof or water-resistant material directly placed on a roof deck before any other roofing materials are installed. It acts as a barrier that protects your home and the roof deck from leaks and the effects of harsh weather.
