Carbon Filter Fan

Carbon Filter Fan

Typically attached to the inline duct fan or tail end of ducting, the carbon filter cleans the air circulating through. The result is fresher air that is clear of odor, spores, and other allergens.

Does a carbon filter need a fan?

It isn’t necessary to have the air being pulled through the carbon filter exhausted outside your growing area; depending on your setup it may even work better to have the filtered air returned immediately to the growing area.

Can you attach a carbon filter directly to a fan?

We don’t recommend mounting the fan directly onto the filter, as the vibration of the fan can cause settling of carbon in the filter. This settling may allow air pockets in the carbon to develop at the top, and untreated air to pass through the filter.

Is it better to push or pull air through a carbon filter?

Can I push or pull through the filter? You can both pull through the filter or push air through the filter. If you are going to push air through the filter it is recommended to take off the outer pre-filter and place the pre-filter prior to the air entering the carbon bed.

Do carbon filters actually work?

Carbon air filters can be effective at filtering VOCs from the air. These are gaseous substances that most other mechanical filters like HEPA filters, cannot touch. Some of the gases in cigarette smoke or those given off by drying paint or cleaning products can be removed from the air by a carbon filter.

How long is a carbon filter good for?

Carbon filters should be replaced after 18-24 months of continuous (24/7) usage. Although this may vary depending on the company product, it has been shown that carbon filters can last for up to four years. These filters’ lifespan is largely dependent on their carbon quality, use, humidity, and plant type.

Where do you put a carbon filter?

The Most Recommended Location. We recommend installing your carbon filter at the beginning of your ducting route. That is, placing it inside of your grow tent where your ductwork begins. This is a common set up, especially among those who use metal halide or HPS grow lights with duct ports.

Do I need air intake in my Grow Tent?

Larger grow tents can benefit from using passive air intake as well but will require higher CFM exhaust fans. Air intake is only a part of the indoor growing equation. Many factors like grow tent size, grow lights, and inline fans contribute to creating the optimal growing environment.

Can I put carbon filter outside tent?

So, you’re thinking of putting the carbon filter outside grow tent. Although, it might bring on a few consequences. But it’s still possible to keep carbon filter outside tent, and ventilate the air smell-free.

How do you exhaust a grow tent?

In this case, you may set the fan and/or filter outside of your grow tent. We recommend setting your extraction fan at the highest point possible. Since heat rises to the top, exhausting that hot air at that point will make the ventilation process efficient.

How long do AC Infinity filters last?

The filter is designed to last 18 to 24 months depending on use.

Can I put my carbon filter on the floor?

Carbon filters should be placed on the floor standing upright or hung horizontally from the ceiling. Place the fan and filter in the room opposite the intake port. From the fan, attach ducting so as to exhaust the scrubbed air out the room. Keep the ducting as short as possible and avoid any bends in the ducting.

How big of a fan do I need for my grow room?

To calculate multiply length x width x height of growing area e.g. A room that is 8′ x 8′ x 8′ will have a volume of 512 cubic feet. Your extraction fan should be able to adequately exchange the air in an indoor garden once every three minutes. Therefore, 512 cubic feet / 3 minutes = 171 CFM.

What do carbon filters remove?

Carbon filters can effectively remove or reduce many contaminants from water including VOCs, chlorine, lead, fluoride, pesticides and much more.

Are charcoal filters safe?

Charcoal water filters are as safe as they are effective.

Does a carbon filter remove CO2?

Activated carbon filters on the market don’t meaningfully reduce CO2. Short of buying a submarine grade CO2 scrubber, the best way to reduce CO2 is to bring in outdoor air.

Elena Rostova
Author

Elena Rostova

Elena Rostova holds a Master's degree in Public Health Journalism. She covers groundbreaking medical research, holistic wellness trends, mental health awareness, and nutritional science.