A toe kick is a notch-shaped recess at the bottom front of a base cabinet. It provides a recess for your feet so you can get slightly closes to the countertop. This improves your balance,and also reduces the fatigue that would result if you were forced to reach across a countertop to work.
How tall should a cabinet kick plate be?
The optimal height for a toe kick is 4 inches, and heights up to 4 inches are common. Increasing the height over 4 inches does not hurt the effectiveness of the toe kick, but it may very slightly reduce the space in your base cabinet.
Do I need toe kick for cabinets?
Toe kick spaces are an important element of kitchen design. In fact, any cabinet that you would stand in front of should have one. The purpose of a toe kick is to create a recess for your feet, which allows you to stand closer to the countertop or workspace more comfortably.
What is the purpose of a cabinet toe kick?
A toe kick is the recessed space on a lower cabinet that offers room for – you guessed it – your toes. These few inches enable your feet to rest comfortably under a small section of the cabinet, allowing you to get closer to the countertop without having to hunch over.
What color should toe kick be?
Think of the discomfort you’d feel if you didn’t have that handy little cave for your toes! To avoid standing out, most toe kicks are painted either black the same color as the cabinets. They are there to serve a practical purpose, after all.
Can I glue toe kick?
How do you attach toe kick? Toe kick is attached with a nail gun or adhesive after the cabinets are installed.
How deep should a kick plate be?
The optimal depth for a toe kick is 3 inches. This provides an adequate recess to stand comfortably and maintain balance while working at a countertop. Almost all factory-made stock cabinets will comply with this depth standard.
How far back should a toe kick be?
Toe Kick. Below the base cabinet, there is a recessed area known as the toe kick. It typically measures 3 inches in height and the depth is approximately 3.5 – 4 inches. The toe kick is an ergonomic feature which places countertops and cabinets within arm’s length.
What can I use as a toe kick?
The most common materials used for making toe kicks are laminated wood and paint-grade ¾-inch plywood. For support blocks, you can use cedar shims or plywood blocks.
How tall is a toe kick?
The typical height for a toe kick is 3.5″, but many of these look a little taller. Increasing the height of the toe kick is one way to give it a little extra prominence and emphasize interesting materials, but keep in mind that you’ll lose a few inches in the height of your lower cabinets.
Why is there space under kitchen cabinets?
Toe spaces can provide space for heat and air registers, as well as ductwork to a central system, or even for installation of individual toe space heaters. The blowers in toe-space heaters tend to be noisy, so research the options before completing the kitchen cabinet plan.
